EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Update of quality control tests for new PV encapsulation materials

Sandra Lust, Thomas Weber, Shiva Ram Kuntamukkula, Anton Mordvinkin, Michael Wendt

EPJ Photovoltaics · 2024 · 15 · 5

DOI: 10.1051/epjpv/2024006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift EPJ Photovoltaics, online erschienen am 15.02.2024. Verfasst von Sandra Lust und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Forschungskuratorium Textil, Bundesministerium für Wirtschaft und Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although ethylene vinyl acetate copolymer (EVA) is still the dominant PV encapsulant, polyolefins (PO) have gained market share in recent years. Like EVA, PO can be mixed with a cross-linking agent and chemically reacted during the lamination process to form polyolefin elastomers (POE). The cross-linked and therefore insoluble fraction of the encapsulation can be determined by extracting the soluble part of the material with a solvent. The degree of cross-linking, or gel content (GC), is determined from the mass ratio before and after extraction of the samples. The analytical methods for determining the GC value are described for example in IEC 62788-1-6 and the Chinese national standard GB/T29848-2018. We observe a significant difference between the test results of these two standards, with the GC values resulting from the GB standard test being significantly higher. This is particularly true in the low GC range. The main reason for this difference is the extraction time of 5 h specified in the GB standard, which is insufficient to ensure complete extraction of the non-crosslinked polymers at lower GC values. However, for certain POE materials the required minimum GC (50%-65%) is exactly in this range.

Förderung

  • Forschungskuratorium Textil, Bundesministerium für Wirtschaft und Energie

Zitieren

APA

Lust, S., Weber, T., Kuntamukkula, S. R., Mordvinkin, A., & Wendt, M. (2024). Update of quality control tests for new PV encapsulation materials. EPJ Photovoltaics, 15, 5. https://doi.org/10.1051/epjpv/2024006

Vancouver

Lust S, Weber T, Kuntamukkula SR, Mordvinkin A, Wendt M. Update of quality control tests for new PV encapsulation materials. EPJ Photovoltaics. 2024;15:5. doi:10.1051/epjpv/2024006

BibTeX
@article{Lust2024,
  author = {Lust, Sandra and Weber, Thomas and Kuntamukkula, Shiva Ram and Mordvinkin, Anton and Wendt, Michael},
  title = {Update of quality control tests for new PV encapsulation materials},
  journal = {EPJ Photovoltaics},
  year = {2024},
  volume = {15},
  pages = {5},
  doi = {10.1051/epjpv/2024006}
}
Kostenlos starten →