EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mesh Convergence and Error Analysis in Finite Element Modeling of Beam Structures

Rustambek Urinov, Azimjon Melikuziyev, Sofiyanur Madaminova, Ramzbek Xamdamov, Sabina Khamrakulova, Qosimjon Mamajonov

EPJ Web of Conferences · 2026 · 376 · 03003

DOI: 10.1051/epjconf/202637603003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift EPJ Web of Conferences, online erschienen am 01.07.2026. Verfasst von Rustambek Urinov und 5 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Checking for mesh convergence is important as it will give you an idea of the quality of your finite element solutions. A cantilever beam with a uniform loading is used as a test case in this study to examine the effect of mesh refinement on the numerical accuracy. Analytical results obtained from Euler–Bernoulli beam theory were used as reference values for the finite element predictions. Meshes were created and gradually refined along a series and comparisons between the displacement and the stress response were made. Relative error, root mean square error (RMSE), Richardson extrapolation and Grid convergence index (GCI) were used to investigate the discretisation error and convergence properties. The numerical results approached the analytical solution as the mesh density was refined, with the displacement approaching the solution faster than the stress. The convergence order was approximately second order for the stress quantity of interest observed at the midspan of the beam. The discretization uncertainty for the fine mesh was estimated to be about 1.3%. The study also seeks to show the impact of stress concentrations around constrained areas and to discuss practical considerations for the interpretation of convergence based on stresses. The outlined procedure here may be used as a reference procedure for verification studies using beam-type finite element models and other structural analysis techniques.

Zitieren

APA

Urinov, R., Melikuziyev, A., Madaminova, S., Xamdamov, R., Khamrakulova, S., & Mamajonov, Q. (2026). Mesh Convergence and Error Analysis in Finite Element Modeling of Beam Structures. EPJ Web of Conferences, 376, 03003. https://doi.org/10.1051/epjconf/202637603003

Vancouver

Urinov R, Melikuziyev A, Madaminova S, Xamdamov R, Khamrakulova S, Mamajonov Q. Mesh Convergence and Error Analysis in Finite Element Modeling of Beam Structures. EPJ Web of Conferences. 2026;376:03003. doi:10.1051/epjconf/202637603003

BibTeX
@article{Urinov2026,
  author = {Urinov, Rustambek and Melikuziyev, Azimjon and Madaminova, Sofiyanur and Xamdamov, Ramzbek and Khamrakulova, Sabina and Mamajonov, Qosimjon},
  title = {Mesh Convergence and Error Analysis in Finite Element Modeling of Beam Structures},
  journal = {EPJ Web of Conferences},
  year = {2026},
  volume = {376},
  pages = {03003},
  doi = {10.1051/epjconf/202637603003}
}
Kostenlos starten →