EUVIMEDEUVIMED entdecken
Crossref

Design, calibration and operational error analysis of a heat flux sensor

Aymen Zribi, Sylvie Bégot, François Lanzetta, Magali Barthès

The European Physical Journal Applied Physics · 2018-04 · 82 (1) · 11001

DOI: 10.1051/epjap/2018170295 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The European Physical Journal Applied Physics, online erschienen am 08.06.2018. Verfasst von Aymen Zribi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we present a gradient based heat flux sensor. It consists of platinum resistances deposited on a glass substrate. The dimensions of are 5 mm × 5 mm × 0.5 mm. The sensor can be embedded in a dedicated housing. The calibration test bench, method, uncertainties and results are presented. This sensor can measure heat fluxes in steady state mode up to 8000 W/m 2 and can withstand 100 °C. The results were found to be consistent with reference heat fluxes. The operational error caused by the sensor is addressed by numerical parametric studies. The influence of different wall thermal properties is studied. Different radiative and convective conditions are also simulated. Finally, the influence of connecting wires is analyzed. In some specific cases, the sensor does not influence the measurement. In all other cases, correction factors are derived. It is shown that radiative heat transfer and connecting wires can have a strong influence on correction factors.

Zitieren

APA

Zribi, A., Bégot, S., Lanzetta, F., & Barthès, M. (2018). Design, calibration and operational error analysis of a heat flux sensor. The European Physical Journal Applied Physics, 82(1), 11001. https://doi.org/10.1051/epjap/2018170295

Vancouver

Zribi A, Bégot S, Lanzetta F, Barthès M. Design, calibration and operational error analysis of a heat flux sensor. The European Physical Journal Applied Physics. 2018;82(1):11001. doi:10.1051/epjap/2018170295

BibTeX
@article{Zribi2018,
  author = {Zribi, Aymen and Bégot, Sylvie and Lanzetta, François and Barthès, Magali},
  title = {Design, calibration and operational error analysis of a heat flux sensor},
  journal = {The European Physical Journal Applied Physics},
  year = {2018},
  volume = {82},
  number = {1},
  pages = {11001},
  doi = {10.1051/epjap/2018170295}
}
Kostenlos starten →