Immersion time effects on composite propellant burn rate
BIO Web of Conferences · 2026 · 226 · 02005
DOI: 10.1051/bioconf/202622602005 ↗Kurz gefasst
Fachartikel in der Zeitschrift BIO Web of Conferences, online erschienen am 06.03.2026. Verfasst von Dwi Setyaningsih und 1 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Acoustic Emission Strandburner is one of popular methods to measure the solid propellant burn rate. Immersion is a critical factor, as HTPB-based propellants contain ammonium perchlorate, a water-soluble oxidizer. This study aims to evaluate the effect of short-time immersion in water on propellant burn rate. Propellant samples were tested under three conditions: without immersion (normal condition), after 60 seconds of immersion, and after 120 seconds of immersion. The results showed that the burn rate at a chamber pressure of 2–6 MPa ranged from 5.38 – 8.36 mm/s, 5.60–7.93 mm/s, and 5.38 – 8.35 mm/s for normal condition, 60 seconds immersion, and 120 seconds immersion, respectively. Statistical analysis using a one-way ANOVA revealed no significant differences in burn rate among the three conditions. These findings indicate that short-term immersion in water does not significantly affect the combustion performance of the propellant..
Zitieren
APA
Setyaningsih, D., & Yastuti, A. F. (2026). Immersion time effects on composite propellant burn rate. BIO Web of Conferences, 226, 02005. https://doi.org/10.1051/bioconf/202622602005
Vancouver
Setyaningsih D, Yastuti AF. Immersion time effects on composite propellant burn rate. BIO Web of Conferences. 2026;226:02005. doi:10.1051/bioconf/202622602005
BibTeX
@article{Setyaningsih2026,
author = {Setyaningsih, Dwi and Yastuti, Aprilia Fitri},
title = {Immersion time effects on composite propellant burn rate},
journal = {BIO Web of Conferences},
year = {2026},
volume = {226},
pages = {02005},
doi = {10.1051/bioconf/202622602005}
}
EUVIMED