EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High‐Frequency Modelling of Electric Machine With Anodised Aluminium Windings at High Temperatures: Frequency‐ and Time‐Domain Validation

Riyad Jbayli, Younes Azzoug, Romain Cousseau, Remus Pusca, Raphael Romary

IET Science, Measurement & Technology · 2026-01 · 20 (1)

DOI: 10.1049/smt2.70073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Science, Measurement & Technology, online erschienen am 15.07.2026. Verfasst von Riyad Jbayli und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a high‐frequency model is proposed for a wound‐rotor synchronous machine with anodised aluminium windings. The model describes the electromagnetic behaviour of the stator windings under high‐frequency excitations, particularly those generated by pulse width modulation inverters. It considers frequency‐dependent parameters along with resistive, inductive, and capacitive coupling between turns. Time‐domain simulations are carried out to analyse the turn voltage distribution during operation, highlighting the electrical stresses that can accelerate insulation ageing. Experimental validation of the proposed model is conducted over a temperature range extending from ambient conditions to 300°C. Good agreement is observed between simulation results and experimental data, validating the accuracy and robustness of the proposed model for evaluating insulation stress and optimising the winding design in machines with anodised aluminium coils supplied by pulse width modulation inverters.

Zitieren

APA

Jbayli, R., Azzoug, Y., Cousseau, R., Pusca, R., & Romary, R. (2026). High‐Frequency Modelling of Electric Machine With Anodised Aluminium Windings at High Temperatures: Frequency‐ and Time‐Domain Validation. IET Science, Measurement & Technology, 20(1). https://doi.org/10.1049/smt2.70073

Vancouver

Jbayli R, Azzoug Y, Cousseau R, Pusca R, Romary R. High‐Frequency Modelling of Electric Machine With Anodised Aluminium Windings at High Temperatures: Frequency‐ and Time‐Domain Validation. IET Science, Measurement & Technology. 2026;20(1). doi:10.1049/smt2.70073

BibTeX
@article{Jbayli2026,
  author = {Jbayli, Riyad and Azzoug, Younes and Cousseau, Romain and Pusca, Remus and Romary, Raphael},
  title = {High‐Frequency Modelling of Electric Machine With Anodised Aluminium Windings at High Temperatures: Frequency‐ and Time‐Domain Validation},
  journal = {IET Science, Measurement & Technology},
  year = {2026},
  volume = {20},
  number = {1},
  doi = {10.1049/smt2.70073}
}
Kostenlos starten →