EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A two‐stage reactive power optimization method for distribution networks based on a hybrid model and data‐driven approach

Ghulam Abbas, Wu Zhi, Aamir Ali

IET Renewable Power Generation · 2024-12 · 18 (16) · 3967-3979

DOI: 10.1049/rpg2.13096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Renewable Power Generation, online erschienen am 28.08.2024. Verfasst von Ghulam Abbas und 2 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Grid Corporation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The uncertainty of distributed energy resources (DERs) and loads in distribution networks poses challenges for reactive power optimization and control timeliness. The computational limitations of the traditional algorithms and the development of artificial intelligence (AI) based technologies have promoted the advancement of hybrid model‐data‐driven algorithms. This article proposes a two‐stage reactive power optimization method for distributed networks (DNs) based on a hybrid model‐data‐driven approach. In the first stage, based on the topology and line parameters of the DN, as well as forecasts of loads and renewable energy outputs, a mixed‐integer second‐order cone programming (MISOCP) algorithm is used to control the on‐load tap changer (OLTC) positions on an hourly day‐ahead basis. In the second stage, leveraging deep learning technology, the real‐time reactive power output of photovoltaics (PV) and wind power units is controlled at a 5‐min time scale throughout the day. Specifically, using traditional solvers, the global optimal reactive power output for PV and wind power units is determined first, corresponding to various load and renewable energy output scenarios. Then, neural networks are trained to map node power to the optimal reactive power outputs of renewable energy units, capturing the complex physical relationships. For the second stage, a transformer network framework with a self‐attention mechanism and multi‐head attention for deep learning training is applied to uncover the intrinsic and physical spatial relationships among high‐dimensional features. The proposed method is tested on a modified IEEE 33‐bus system with multiple distributed renewable energy sources. The case study results demonstrate that the proposed hybrid model‐data‐driven algorithm effectively coordinates day‐ahead and real‐time controls of various devices, achieving real‐time model‐free optimization throughout the day. Compared to traditional deep neural networks (DNNs) and convolutional neural networks (CNNs), the transformer network provides superior reactive power optimization results.

Förderung

  • State Grid Corporation of China

Zitieren

APA

Abbas, G., Zhi, W., & Ali, A. (2024). A two‐stage reactive power optimization method for distribution networks based on a hybrid model and data‐driven approach. IET Renewable Power Generation, 18(16), 3967-3979. https://doi.org/10.1049/rpg2.13096

Vancouver

Abbas G, Zhi W, Ali A. A two‐stage reactive power optimization method for distribution networks based on a hybrid model and data‐driven approach. IET Renewable Power Generation. 2024;18(16):3967-3979. doi:10.1049/rpg2.13096

BibTeX
@article{Abbas2024,
  author = {Abbas, Ghulam and Zhi, Wu and Ali, Aamir},
  title = {A two‐stage reactive power optimization method for distribution networks based on a hybrid model and data‐driven approach},
  journal = {IET Renewable Power Generation},
  year = {2024},
  volume = {18},
  number = {16},
  pages = {3967--3979},
  doi = {10.1049/rpg2.13096}
}
Kostenlos starten →