EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Semi‐Quadratic Buck/Boost Converter With Dual Operating Modes and Continuous Input/Output Current for Renewable Energy

Mustafa Okati, Mahdiyeh Eslami, Mojtaba Okati

IET Power Electronics · 2026-01 · 19 (1)

DOI: 10.1049/pel2.70289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Power Electronics, online erschienen am 23.07.2026. Verfasst von Mustafa Okati und 2 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐gain DC‐DC converters play a vital role in photovoltaic conversion systems. Achieving high gain often requires operating at extremely high duty cycles, which can lead to increased costs, higher power losses, and reduced system performance. To address these challenges, this study proposes a non‐isolated semi‐quadratic DC‐DC converter, which is built based on the traditional CUK converter and operates in two distinct modes. In the first mode, the converter achieves a semi‐quadratic voltage gain ratio of D(3−2D)/(1−D) 2 , while in the second mode, the gain ratio is D/(1−D). A key feature of this design is the inclusion of inductive filters at both the input and output ports, ensuring continuous input and output currents. This reduces current stress on the output capacitors and minimises voltage ripple. The study evaluates the converter's performance in continuous conduction mode, analysing efficiency and small‐signal modelling while accounting for the effects of parasitic resistance under steady‐state conditions. Simulations were conducted using PLECS software, and the results are presented to validate the design. Additionally, a 75 W laboratory prototype was tested, with experimental efficiencies of 90.3% in boost mode and 12 W with experimental efficiencies of 88.1% in buck mode. These experimental results align closely with theoretical predictions, highlighting the converter's potential for practical applications. Due to its high efficiency, dual operating modes, and ability to deliver continuous currents, the proposed converter is well‐suited for renewable energy applications, particularly in PV systems and fuel cells.

Zitieren

APA

Okati, M., Eslami, M., & Okati, M. (2026). A Semi‐Quadratic Buck/Boost Converter With Dual Operating Modes and Continuous Input/Output Current for Renewable Energy. IET Power Electronics, 19(1). https://doi.org/10.1049/pel2.70289

Vancouver

Okati M, Eslami M, Okati M. A Semi‐Quadratic Buck/Boost Converter With Dual Operating Modes and Continuous Input/Output Current for Renewable Energy. IET Power Electronics. 2026;19(1). doi:10.1049/pel2.70289

BibTeX
@article{Okati2026,
  author = {Okati, Mustafa and Eslami, Mahdiyeh and Okati, Mojtaba},
  title = {A Semi‐Quadratic Buck/Boost Converter With Dual Operating Modes and Continuous Input/Output Current for Renewable Energy},
  journal = {IET Power Electronics},
  year = {2026},
  volume = {19},
  number = {1},
  doi = {10.1049/pel2.70289}
}
Kostenlos starten →