EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Sequential Switching With Passive Auxiliary Network for Transient Stress Mitigation in Series‐Connected IGBTs

Shuo Gao, Xu Wang, Dan Yang, Bin Xu

IET Power Electronics · 2026-01 · 19 (1)

DOI: 10.1049/pel2.70282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Power Electronics, online erschienen am 18.07.2026. Verfasst von Shuo Gao und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Higher Education Discipline Innovation Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Medium‐voltage (MV) high‐power motor drive systems face severe challenges of insulation degradation induced by extreme transient d v /d t stresses. This paper proposes an active stress mitigation strategy based on constraint‐bounded sequential switching to balance system‐level protection and device‐level stress. Leveraging the temporal degrees of freedom in the series‐connected topology, the method introduces microsecond‐level delays that reshape the steep monolithic voltage step into a gentle staircase profile. This process is assisted by a low‐complexity passive auxiliary network. Additionally, a deeply coupled physical analytical model is established to define the safe operating boundaries quantitatively for sequential delays and damping impedances. Consequently, this approach transforms transient stress optimization into a deterministic, forward design process that does not require complex, active, closed‐loop feedback hardware. The effectiveness of the proposed methodology was verified on a 1.14 kV prototype platform. Experimental results show that, with the optimal sequential driving strategy, the maximum voltage overshoot in the system decreases by 83.8%. Simultaneously, the external composite current overshoot is reduced by 57.10% and the internal current stress within the IGBTs decreases by 73.70%. This study provides a highly reliable, minimalist design paradigm for MV series‐connected IGBT inverters used in harsh industrial applications.

Förderung

  • National Natural Science Foundation of China
  • Higher Education Discipline Innovation Project

Zitieren

APA

Gao, S., Wang, X., Yang, D., & Xu, B. (2026). Sequential Switching With Passive Auxiliary Network for Transient Stress Mitigation in Series‐Connected IGBTs. IET Power Electronics, 19(1). https://doi.org/10.1049/pel2.70282

Vancouver

Gao S, Wang X, Yang D, Xu B. Sequential Switching With Passive Auxiliary Network for Transient Stress Mitigation in Series‐Connected IGBTs. IET Power Electronics. 2026;19(1). doi:10.1049/pel2.70282

BibTeX
@article{Gao2026,
  author = {Gao, Shuo and Wang, Xu and Yang, Dan and Xu, Bin},
  title = {Sequential Switching With Passive Auxiliary Network for Transient Stress Mitigation in Series‐Connected IGBTs},
  journal = {IET Power Electronics},
  year = {2026},
  volume = {19},
  number = {1},
  doi = {10.1049/pel2.70282}
}
Kostenlos starten →