EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Improved Position Self‐Calibration Method Based on Multi‐Harmonics Estimation for Resolver‐to‐Digital Conversion

Jialin Li, Zhen Chen, Hengzai Hu, Chaoyong Guo, Qiang Zhang, Youguang Guo

IET Power Electronics · 2025-01 · 18 (1)

DOI: 10.1049/pel2.70139 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Power Electronics, online erschienen am 21.10.2025. Verfasst von Jialin Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The position self‐calibration strategy is beneficial in decreasing the position deviation of the resolver‐to‐digital conversion (RDC), thereby improving the pointing accuracy of the servo system applied to the satellite optical payload. However, existing self‐calibration methods primarily focus on the second harmonic caused by a single non‐ideal factor, neglecting the fundamental and higher order harmonics in the typical position deviation resulting from the coupling of multiple factors. To address this issue, an improved position self‐calibration method based on multi‐harmonics estimation for the RDC is proposed in this paper. First, the position deviation model under multi‐factors coupling is established. Second, the speed deviation caused by the position deviation and its integral signal is estimated by the speed observer. The integral signal is input into the multi‐harmonics observer, simultaneously estimating the DC, fundamental and higher‐order harmonics components, while also analysing the convergence conditions of the observers. Finally, the position deviation is estimated by combining the estimations of harmonics, and the compensation lookup table of the position deviation is established. Simulation and experimental results show that the calibrated deviation is reduced by 89.4% relative to the original deviation. Compared with a comparable method, the proposed method improves calibration accuracy by 27%.

Zitieren

APA

Li, J., Chen, Z., Hu, H., Guo, C., Zhang, Q., & Guo, Y. (2025). An Improved Position Self‐Calibration Method Based on Multi‐Harmonics Estimation for Resolver‐to‐Digital Conversion. IET Power Electronics, 18(1). https://doi.org/10.1049/pel2.70139

Vancouver

Li J, Chen Z, Hu H, Guo C, Zhang Q, Guo Y. An Improved Position Self‐Calibration Method Based on Multi‐Harmonics Estimation for Resolver‐to‐Digital Conversion. IET Power Electronics. 2025;18(1). doi:10.1049/pel2.70139

BibTeX
@article{Li2025,
  author = {Li, Jialin and Chen, Zhen and Hu, Hengzai and Guo, Chaoyong and Zhang, Qiang and Guo, Youguang},
  title = {An Improved Position Self‐Calibration Method Based on Multi‐Harmonics Estimation for Resolver‐to‐Digital Conversion},
  journal = {IET Power Electronics},
  year = {2025},
  volume = {18},
  number = {1},
  doi = {10.1049/pel2.70139}
}
Kostenlos starten →