EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A comparative analysis of power pulsating buffer architectures for mitigating high‐frequency and low‐frequency ripple in PV microinverter applications

Writtik Dutta, Connor Reece, Ayan Mallik

IET Power Electronics · 2024-08 · 17 (10) · 1262-1286

DOI: 10.1049/pel2.12608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Power Electronics, online erschienen am 29.11.2023. Verfasst von Writtik Dutta und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study provides a comparative analysis of feasible architectures of Power Pulsating Buffer (PPB) as an actively controlled energy storage solution alternative to the electrolytic capacitors in a single‐stage isolated, single‐phase 120 V AC 60Hz grid‐connected photovoltaic (PV) microinverter for a 400 W rated system with 20–40 V input range. The comparison encompasses key factors including energy density, volume reduction, efficiency, frequency operation, and system stability. The findings shed light on the primary advantages and disadvantages of the buck‐ and boost‐derived PPB under study. The results indicate that the boost PPB exhibits enhanced stability, a more compact design, and higher power efficiency compared to the buck PPB. However, for low switching frequency operations, the buck PPB proves to be more effective in mitigating DC port voltage ripple and ensuring controller over microinverter load variation.

Zitieren

APA

Dutta, W., Reece, C., & Mallik, A. (2024). A comparative analysis of power pulsating buffer architectures for mitigating high‐frequency and low‐frequency ripple in PV microinverter applications. IET Power Electronics, 17(10), 1262-1286. https://doi.org/10.1049/pel2.12608

Vancouver

Dutta W, Reece C, Mallik A. A comparative analysis of power pulsating buffer architectures for mitigating high‐frequency and low‐frequency ripple in PV microinverter applications. IET Power Electronics. 2024;17(10):1262-1286. doi:10.1049/pel2.12608

BibTeX
@article{Dutta2024,
  author = {Dutta, Writtik and Reece, Connor and Mallik, Ayan},
  title = {A comparative analysis of power pulsating buffer architectures for mitigating high‐frequency and low‐frequency ripple in PV microinverter applications},
  journal = {IET Power Electronics},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {1262--1286},
  doi = {10.1049/pel2.12608}
}
Kostenlos starten →