EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A non‐isolated quadratic boost converter with improved gain, high efficiency, and continuous input current

Mahnaz Izadi, Ali Mosallanejad, Alireza Lahooti Eshkevari

IET Power Electronics · 2023-02 · 16 (2) · 193-208

DOI: 10.1049/pel2.12376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Power Electronics, online erschienen am 25.08.2022. Verfasst von Mahnaz Izadi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents and comprehensively investigates a non‐isolated quadratic boost dc–dc converter (QBC), designed based on integrating a triple winding coupled inductor into the basic quadratic impedance network. The topology only contains ten components. It provides a high boost factor as well as high efficiency. Unlike most previous step‐up dc–dc converters, the employed improving method does not change the converter input current from continuous mode to pulsating or discontinuous shapes, making it suitable for connecting to the current sensitive resources. Thanks to this improvement, the voltage stress across the power switch is low, especially for higher winding coefficient values. A 20/240 V/240 W prototype has been designed and fabricated to evaluate the operating principle and performance of this QBC. Experimental results show the converter produces high gain (12 times as tested) and operate with high efficiency (up to 94%). Also, the voltage stress on the power switch is one‐third of the output voltage.

Zitieren

APA

Izadi, M., Mosallanejad, A., & Eshkevari, A. L. (2023). A non‐isolated quadratic boost converter with improved gain, high efficiency, and continuous input current. IET Power Electronics, 16(2), 193-208. https://doi.org/10.1049/pel2.12376

Vancouver

Izadi M, Mosallanejad A, Eshkevari AL. A non‐isolated quadratic boost converter with improved gain, high efficiency, and continuous input current. IET Power Electronics. 2023;16(2):193-208. doi:10.1049/pel2.12376

BibTeX
@article{Izadi2023,
  author = {Izadi, Mahnaz and Mosallanejad, Ali and Eshkevari, Alireza Lahooti},
  title = {A non‐isolated quadratic boost converter with improved gain, high efficiency, and continuous input current},
  journal = {IET Power Electronics},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {193--208},
  doi = {10.1049/pel2.12376}
}
Kostenlos starten →