EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Insulation Material Degradation Assessment Method Based on Ultrasonic Detection of Charge Vibration at Pulse Edges

Dongxin He, Xiaobin Zheng, Weijie Song, Minghua Zhao, Hexing Li, Anqi Guo, Yulong Xing, Cong Zhang, Qingquan Li

IET Nanodielectrics · 2026-01 · 9 (1)

DOI: 10.1049/nde2.70031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Nanodielectrics, online erschienen am 15.05.2026. Verfasst von Dongxin He und 8 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China - State Grid Corporation Joint Fund for Smart Grid.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐voltage power semiconductor devices are subjected to repetitive frequency square‐wave pulse voltages during actual operation, making the online assessment of their packaging insulation material degradation challenging. Based on the principle of charge–atom coupling, this paper proposes a novel assessment method utilising molecular vibration acoustic waves induced by forced charge motion at square‐wave pulse edges. By directly employing the rising and falling edges of high‐voltage square‐wave pulses inherent in device operation as excitation sources, this method stimulates molecular chain vibrations within the insulation material and achieves in situ degradation assessment through synchronous detection of acoustic signals. Results indicate that pulse repetition frequency has no significant effect on vibration amplitude; vibration amplitude is proportional to the square of the pulse voltage amplitude and temperature exhibits different effects on the two materials—silicone gel shows a monotonic increase in vibration amplitude with rising temperature, whereas silicone rubber initially increases and subsequently decreases. Under fast edge excitation, low cross‐linking density insulation materials exhibit a double‐peak waveform, whereas high cross‐linking density materials consistently exhibit a single‐peak waveform. This phenomenon reveals intrinsic differences in material chain segment dynamics, providing a new technical pathway for the online monitoring of power device insulation systems without requiring external Gaussian pulse generators.

Förderung

  • National Natural Science Foundation of China - State Grid Corporation Joint Fund for Smart Grid

Zitieren

APA

He, D., Zheng, X., Song, W., Zhao, M., Li, H., Guo, A., Xing, Y., Zhang, C., & Li, Q. (2026). Insulation Material Degradation Assessment Method Based on Ultrasonic Detection of Charge Vibration at Pulse Edges. IET Nanodielectrics, 9(1). https://doi.org/10.1049/nde2.70031

Vancouver

He D, Zheng X, Song W, Zhao M, Li H, Guo A, et al. Insulation Material Degradation Assessment Method Based on Ultrasonic Detection of Charge Vibration at Pulse Edges. IET Nanodielectrics. 2026;9(1). doi:10.1049/nde2.70031

BibTeX
@article{He2026,
  author = {He, Dongxin and Zheng, Xiaobin and Song, Weijie and Zhao, Minghua and Li, Hexing and Guo, Anqi and Xing, Yulong and Zhang, Cong and Li, Qingquan},
  title = {Insulation Material Degradation Assessment Method Based on Ultrasonic Detection of Charge Vibration at Pulse Edges},
  journal = {IET Nanodielectrics},
  year = {2026},
  volume = {9},
  number = {1},
  doi = {10.1049/nde2.70031}
}
Kostenlos starten →