EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Resistivity and Tensile Strength of Al–Mg–Si Alloy Wire Conductors

Jing Chen, Chongjun Tian, Jinghui Gao, Lisheng Zhong

High Voltage · 06.04.2026

DOI: 10.1049/hve2.70154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift High Voltage, online erschienen am 06.04.2026. Verfasst von Jing Chen und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminium alloy is potentially used for power transmission lines due to its light weight and high strength. The aluminium alloy wire conductors with different Mg and Si contents were studied through electrical resistivity and mechanical properties. The effects of heat treatment temperature and time on the alloy wire conductors were also discussed. The experimental results show that increasing the Mg and Si content significantly enhances the tensile strength and elongation, but it also causes an increase in the electrical resistivity to some extent. Appropriate treatment temperature (e.g., 160°C) makes the alloy wire conductor have good electrical and mechanical properties. The treatment time only has a significant influence on the elongation, and the best treatment time is 6 h for the alloy wire conductor. This study lays a foundation for the application of the Al–Mg–Si alloy conductor in transmission lines.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, J., Tian, C., Gao, J., & Zhong, L. (2026). Resistivity and Tensile Strength of Al–Mg–Si Alloy Wire Conductors. High Voltage. https://doi.org/10.1049/hve2.70154

Vancouver

Chen J, Tian C, Gao J, Zhong L. Resistivity and Tensile Strength of Al–Mg–Si Alloy Wire Conductors. High Voltage. 2026. doi:10.1049/hve2.70154

BibTeX
@article{Chen2026,
  author = {Chen, Jing and Tian, Chongjun and Gao, Jinghui and Zhong, Lisheng},
  title = {Resistivity and Tensile Strength of Al–Mg–Si Alloy Wire Conductors},
  journal = {High Voltage},
  year = {2026},
  doi = {10.1049/hve2.70154}
}
Kostenlos starten →