A Negative‐Sequence Current‐Based Method for Asymmetrical Fault Location in Stitched Transmission Lines
IET Generation, Transmission & Distribution · 2026-01 · 20 (1)
DOI: 10.1049/gtd2.70396 ↗Kurz gefasst
Fachartikel in der Zeitschrift IET Generation, Transmission & Distribution, online erschienen am 06.08.2026. Verfasst von Matin Golpayegani und 1 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Due to economic issues and the shortage of bays in high‐voltage substations, a special type of double‐circuit line called ‘stitched lines’ is used, which is connected to a bay at both ends. However, the connection of these lines to high‐voltage substations makes the current of each circuit unavailable separately. Therefore, fault location in these lines is challenging. In this paper, a new method based on a negative‐sequence network is proposed for locating asymmetrical faults using the current from the two ends of the line. It is notable that the proposed method is not affected by the mutual coupling between the two circuits and the transposition of the lines due to the use of a negative‐sequence network. The accuracy of the method for different asymmetrical faults at various locations with different fault resistances is evaluated by considering noise; uncertainty of the stitched line; and Thevenin impedances; sampling frequency change; fault inception angle; current transformer saturation; and fault clearing time, considering line shunt capacitance in all conditions. The obtained results indicate that the proposed method has appropriate performance in all scenarios, with an average error of less than 1% and a standard deviation of less than 0.5%.
Zitieren
APA
Golpayegani, M., & Damchi, Y. (2026). A Negative‐Sequence Current‐Based Method for Asymmetrical Fault Location in Stitched Transmission Lines. IET Generation, Transmission & Distribution, 20(1). https://doi.org/10.1049/gtd2.70396
Vancouver
Golpayegani M, Damchi Y. A Negative‐Sequence Current‐Based Method for Asymmetrical Fault Location in Stitched Transmission Lines. IET Generation, Transmission & Distribution. 2026;20(1). doi:10.1049/gtd2.70396
BibTeX
@article{Golpayegani2026,
author = {Golpayegani, Matin and Damchi, Yaser},
title = {A Negative‐Sequence Current‐Based Method for Asymmetrical Fault Location in Stitched Transmission Lines},
journal = {IET Generation, Transmission & Distribution},
year = {2026},
volume = {20},
number = {1},
doi = {10.1049/gtd2.70396}
}
EUVIMED