Real‐Time Active Power Control Method Considering Voltage Security Constraints and Effective Regulation Space of Multitype Resources
IET Energy Systems Integration · 2026-01 · 8 (1)
DOI: 10.1049/esi2.70049 ↗Kurz gefasst
Fachartikel in der Zeitschrift IET Energy Systems Integration, online erschienen am 25.06.2026. Verfasst von Guoqing Li und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Renewable energy bases in Desert‐Gobi‐Wasteland (DGW) areas connected with high‐voltage direct current (HVDC) transmission systems show notable weak‐grid features, including low inertia, weak damping and a low short‐circuit ratio. This results in strong active power–voltage (P–V) coupling effects, making existing real‐time active power control methods ineffective. To tackle this problem, this paper proposes a real‐time active power control method that simultaneously considers static voltage security constraints and the effective regulation space of various resources. The method ensures safe and stable system operation while efficiently using regulation resources. First, the causes of the strong P–V coupling effects in weak HVDC sending‐end AC power systems integrated with renewable energy sources are analysed. Sensitivity indices are used to measure the degree of coupling under different operating conditions. Next, considering the impact of uncertainties in renewable energy output on identifying system voltage weak points, combined with the impedance modulus margin indicator (IMMI), a voltage weak point identification approach based on probabilistic power flow is proposed. The effects of active power regulation from resources such as wind power, photovoltaic and HVDC links on these weak points' voltages are analysed and a quantitative method for active power regulation space of multiple resource types, considering static voltage security constraints, is presented. Then, by integrating voltage‐active power sensitivity and the effective regulation capacity of various resources, a real‐time active power control strategy is designed. This strategy incorporates resource prioritisation and differentiated power dispatch, aiming to meet active power regulation needs while reducing negative impacts on voltages at weak points. Finally, the effectiveness of the proposed approach is validated using a modified IEEE 30‐bus system and a modified IEEE 57‐bus system.
Zitieren
APA
Li, G., Sun, H., Jiang, S., Xin, Y., & Lou, J. (2026). Real‐Time Active Power Control Method Considering Voltage Security Constraints and Effective Regulation Space of Multitype Resources. IET Energy Systems Integration, 8(1). https://doi.org/10.1049/esi2.70049
Vancouver
Li G, Sun H, Jiang S, Xin Y, Lou J. Real‐Time Active Power Control Method Considering Voltage Security Constraints and Effective Regulation Space of Multitype Resources. IET Energy Systems Integration. 2026;8(1). doi:10.1049/esi2.70049
BibTeX
@article{Li2026,
author = {Li, Guoqing and Sun, Heyang and Jiang, Shouqi and Xin, Yechun and Lou, Jian},
title = {Real‐Time Active Power Control Method Considering Voltage Security Constraints and Effective Regulation Space of Multitype Resources},
journal = {IET Energy Systems Integration},
year = {2026},
volume = {8},
number = {1},
doi = {10.1049/esi2.70049}
}
EUVIMED