EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis and Calculation of No‐Load Leakage Flux Coefficient for Arc Motors

YuTong Wang, Xin Li, XiaoQing Li, Yi Sun, HaoMing Qu, QunYuan Li, JiaRen Xu

Electrical Materials and Applications · 2025

DOI: 10.1049/ema3.70013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electrical Materials and Applications, 2025. Verfasst von YuTong Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The no‐load leakage coefficient reflects the effective utilisation rate of the total magnetic flux provided by the permanent magnet to the external magnetic circuit under no‐load conditions. It influences not only the demagnetisation resistance of the permanent magnet material but also significantly impacts the overall performance of the motor. This paper focuses on the drive system of the wing gate machine, designing and developing an axial flux arc motor. The simulation results of three‐dimensional finite element method and piecewise two‐dimensional finite element method are compared and analysed. Various forms of magnetic leakage in this motor are analysed, and analytical expressions for the leakage permeance corresponding to each type of magnetic leakage are derived. An equivalent magnetic circuit model of the motor is established and the no‐load leakage coefficient is calculated using both the finite element method and the equivalent magnetic circuit method. A prototype with an air gap length of 1 mm was used to test the no‐load back potential and the accuracy of the method for calculating magnetic flux leakage coefficient was verified.

Zitieren

APA

Wang, Y., Li, X., Li, X., Sun, Y., Qu, H., Li, Q., & Xu, J. (2025). Analysis and Calculation of No‐Load Leakage Flux Coefficient for Arc Motors. Electrical Materials and Applications. https://doi.org/10.1049/ema3.70013

Vancouver

Wang Y, Li X, Li X, Sun Y, Qu H, Li Q, et al. Analysis and Calculation of No‐Load Leakage Flux Coefficient for Arc Motors. Electrical Materials and Applications. 2025. doi:10.1049/ema3.70013

BibTeX
@article{Wang2025,
  author = {Wang, YuTong and Li, Xin and Li, XiaoQing and Sun, Yi and Qu, HaoMing and Li, QunYuan and Xu, JiaRen},
  title = {Analysis and Calculation of No‐Load Leakage Flux Coefficient for Arc Motors},
  journal = {Electrical Materials and Applications},
  year = {2025},
  doi = {10.1049/ema3.70013}
}
Kostenlos starten →