Experimental Characterisation, Numerical Modelling and Electro‐Thermal Drive‐Cycle Evaluation of a Novel Electric Motor Shaft‐Jacket Cooling System
IET Electric Power Applications · 2026-01 · 20 (1)
DOI: 10.1049/elp2.70240 ↗Kurz gefasst
Fachartikel in der Zeitschrift IET Electric Power Applications, online erschienen am 08.11.2026. Verfasst von Steven Vanhee und 3 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This paper investigates a novel rotor shaft‐jacket cooling concept for high‐performance traction motors through a combined experimental and numerical approach. A dedicated static testbench is developed to characterise the temperature distribution and hydraulic performance under controlled boundary conditions. A high‐fidelity conjugate heat‐transfer CFD model of the complete rotor assembly is validated against measurements, achieving maximum deviations of 6% in pressure drop and 3°C in temperature. The validated CFD model is extended using a rotating reference frame and benchmarked against a semi‐empirical rotating‐channel heat‐transfer model. Both approaches show that shaft rotation significantly enhances heat transfer, reducing the shaft convective thermal resistance by more than 50% at high rotational speeds. A reduced‐order lumped‐parameter thermal network is derived from the CFD results and integrated into a coupled electro‐thermal model of a 300‐kW permanent‐magnet synchronous motor. The model is used to predict rotor and magnet temperatures over the WLTP Class 3 drive cycle using temperature‐dependent electromagnetic losses. The proposed shaft‐jacket cooling concept is benchmarked against two state‐of‐the‐art shaft‐cooling architectures. The results demonstrate significant improvements in rotor cooling performance, limiting magnet temperatures to approximately 160°C compared to 190°C–210°C for conventional shaft‐cooling solutions, thereby enabling the use of lower magnet grades with reduced rare‐earth content.
Zitieren
APA
Vanhee, S., Nonneman, J., Paepe, M. D., & Boon, F. (2026). Experimental Characterisation, Numerical Modelling and Electro‐Thermal Drive‐Cycle Evaluation of a Novel Electric Motor Shaft‐Jacket Cooling System. IET Electric Power Applications, 20(1). https://doi.org/10.1049/elp2.70240
Vancouver
Vanhee S, Nonneman J, Paepe MD, Boon F. Experimental Characterisation, Numerical Modelling and Electro‐Thermal Drive‐Cycle Evaluation of a Novel Electric Motor Shaft‐Jacket Cooling System. IET Electric Power Applications. 2026;20(1). doi:10.1049/elp2.70240
BibTeX
@article{Vanhee2026,
author = {Vanhee, Steven and Nonneman, Jasper and Paepe, Michel De and Boon, Fabrice},
title = {Experimental Characterisation, Numerical Modelling and Electro‐Thermal Drive‐Cycle Evaluation of a Novel Electric Motor Shaft‐Jacket Cooling System},
journal = {IET Electric Power Applications},
year = {2026},
volume = {20},
number = {1},
doi = {10.1049/elp2.70240}
}
EUVIMED