Dynamic dq Model of PMSM Using FE‐Based LUTs
IET Electric Power Applications · 2025-01 · 19 (1)
DOI: 10.1049/elp2.70037 ↗Kurz gefasst
Fachartikel in der Zeitschrift IET Electric Power Applications, online erschienen am 27.05.2025. Verfasst von Christian Kukura und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Faculty of Science and Engineering, University of Manchester.
Abstract (Originalsprache)
In recent years, a significant amount of research on modelling of electrical machines was dedicated to high fidelity hybrid models that incorporate pre‐calculated FEA data in the form of lookup tables (LUTs). Despite the increasing interest in this dynamic modelling approach, the literature largely disregards how the construction process of LUTs can impact both the accuracy of the model and the computational efficiency. This paper explores the LUT accuracy level attainable by application of various relevant data fitting interpolation algorithms and data calibration parameters using a standard permanent magnet machine geometry. It is demonstrated that an optimal trade‐off between high accuracy LUT demand and the inherent high computational requirements associated with creating the requisite FEA datasets is important for facilitating effective development of hybrid model LUTs.
Förderung
- Faculty of Science and Engineering, University of Manchester
Zitieren
APA
Kukura, C., Apsley, J., & Djurovic, S. (2025). Dynamic dq Model of PMSM Using FE‐Based LUTs. IET Electric Power Applications, 19(1). https://doi.org/10.1049/elp2.70037
Vancouver
Kukura C, Apsley J, Djurovic S. Dynamic dq Model of PMSM Using FE‐Based LUTs. IET Electric Power Applications. 2025;19(1). doi:10.1049/elp2.70037
BibTeX
@article{Kukura2025,
author = {Kukura, Christian and Apsley, Judith and Djurovic, Siniša},
title = {Dynamic dq Model of PMSM Using FE‐Based LUTs},
journal = {IET Electric Power Applications},
year = {2025},
volume = {19},
number = {1},
doi = {10.1049/elp2.70037}
}
EUVIMED