Impact of Virtual Inertia Frequency Regulation Control on Junction Temperature of Machine‐Side Converter in Doubly‐Fed Induction Generator
Electronics Letters · 2026-01 · 62 (1)
DOI: 10.1049/ell2.70633 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics Letters, online erschienen am 03.08.2026. Verfasst von Zhou Zhiting und 2 weiteren Autor:innen. Die Arbeit nennt 4 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In this letter, we investigate the influence of virtual inertia frequency regulation control on the junction temperature of a machine‐side converter for a 2 MW doubly‐fed induction generator (DFIG), utilising the electro‐thermal co‐simulation method. Virtual inertia control affects the junction temperature not as a root cause, but indirectly through the following mechanism chain: control parameters alter the rotor speed dynamics, which changes the rotor current amplitude and frequency, subsequently affecting the power device losses and ultimately causing junction temperature fluctuations. The findings indicate that when the unit operates at wind speed near synchronous speed, the rotor speed easily crosses the synchronous speed during frequency regulation, resulting in severe junction temperature fluctuation of the converter. Conversely, when the unit operates at high or low wind speed, the rotor speed is far from the synchronous speed, and the junction temperature fluctuation is relatively moderate. The droop coefficient has a significantly greater impact on junction temperature fluctuation than the virtual inertia coefficient.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhiting, Z., Hui, L., & Fan, Z. (2026). Impact of Virtual Inertia Frequency Regulation Control on Junction Temperature of Machine‐Side Converter in Doubly‐Fed Induction Generator. Electronics Letters, 62(1). https://doi.org/10.1049/ell2.70633
Vancouver
Zhiting Z, Hui L, Fan Z. Impact of Virtual Inertia Frequency Regulation Control on Junction Temperature of Machine‐Side Converter in Doubly‐Fed Induction Generator. Electronics Letters. 2026;62(1). doi:10.1049/ell2.70633
BibTeX
@article{Zhiting2026,
author = {Zhiting, Zhou and Hui, Li and Fan, Zhen‐nan},
title = {Impact of Virtual Inertia Frequency Regulation Control on Junction Temperature of Machine‐Side Converter in Doubly‐Fed Induction Generator},
journal = {Electronics Letters},
year = {2026},
volume = {62},
number = {1},
doi = {10.1049/ell2.70633}
}
EUVIMED