EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Industrial Inspection Robot With Large Configuration Space Based on Geometry‐Changing Tracked Robot

Ge Wan, Mengke Zhang, Yin He, Dehua Chen, Chao Xu, Jie Sun, Yanjun Cao

IET Cyber-Systems and Robotics · 2026-01 · 8 (1)

DOI: 10.1049/csy2.70041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Cyber-Systems and Robotics, online erschienen am 11.03.2026. Verfasst von Ge Wan und 6 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the increasing demand for automated inspection solutions in complex industrial environments, existing robotic platforms face significant limitations in terms of endurance, payload capacity and obstacle‐crossing capabilities. In this paper, we present a novel inspection robot system based on the CubeTrack tracked platform, featuring a large configuration space achieved through the integration of a manipulator and advanced mobility mechanisms. Our system incorporates a quad‐slider elliptical trammel mechanism (Qs‐ETM) that enables geometry‐changing tracks for enhanced terrain adaptability while maintaining track tension stability. To address multi‐layer navigation challenges, we propose an efficient trajectory planning algorithm that extracts traversable planes from three‐dimensional (3D) point clouds and constructs a lightweight plane graph for path optimisation. Additionally, we develop a flipper control algorithm that uses only low‐cost local sensor measurement (time‐of‐flight [TOF] sensors and inertial measurement unit [IMU]) to enable autonomous stair navigation without pre‐mapped environments. The inspection system integrates multiple sensors, including light detection and ranging (LiDAR) sensor, RGB cameras, gas sensors and thermal cameras, providing comprehensive monitoring capabilities for industrial inspection demands. Extensive real‐world experiments demonstrate the system's effectiveness in navigating complex environments with stairs, multiple layers and narrow passages, validating both the mechanical design and algorithmic approaches for practical industrial inspection tasks.

Zitieren

APA

Wan, G., Zhang, M., He, Y., Chen, D., Xu, C., Sun, J., & Cao, Y. (2026). Industrial Inspection Robot With Large Configuration Space Based on Geometry‐Changing Tracked Robot. IET Cyber-Systems and Robotics, 8(1). https://doi.org/10.1049/csy2.70041

Vancouver

Wan G, Zhang M, He Y, Chen D, Xu C, Sun J, et al. Industrial Inspection Robot With Large Configuration Space Based on Geometry‐Changing Tracked Robot. IET Cyber-Systems and Robotics. 2026;8(1). doi:10.1049/csy2.70041

BibTeX
@article{Wan2026,
  author = {Wan, Ge and Zhang, Mengke and He, Yin and Chen, Dehua and Xu, Chao and Sun, Jie and Cao, Yanjun},
  title = {Industrial Inspection Robot With Large Configuration Space Based on Geometry‐Changing Tracked Robot},
  journal = {IET Cyber-Systems and Robotics},
  year = {2026},
  volume = {8},
  number = {1},
  doi = {10.1049/csy2.70041}
}
Kostenlos starten →