EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Tribological and mechanical behaviours of resin‐based friction materials based on microcrack filling

Lekai Li, Guixiong Gao, Jin Tong, Jian Zhuang, Wei Song, Yunhai Ma, Guoqin Liu, Feipeng Cao, Shengwang Yuan, Qifeng Zhang

Biosurface and Biotribology · 2023-03 · 9 (1) · 1-8

DOI: 10.1049/bsb2.12055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biosurface and Biotribology, online erschienen am 29.11.2022. Verfasst von Lekai Li und 9 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Department of Science and Technology of Jilin Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the friction performance of resin‐based friction materials, five types of specimens with different polymer ether ketone (PEEK) contents were fabricated and their physiomechanical behaviours were tested and, their tribological properties were investigated using a JF150F‐II constant‐speed tester. It was found that the addition of PEEK had a positive influence on the properties of the friction materials, and sample FM‐3 (the shorthand of ‘Friction Materials‐3’, containing 2 wt% PEEK) exhibited improved friction performance with a fade ratio and recovery ratio of 8.6% and 101.1% respectively. Among all samples, FM‐4 (the shorthand of ‘Friction Materials‐4’, containing 3 wt% PEEK) had the lowest specific wear rate with a value of 0.622 × 10 −7 cm 3 (N·m) −1 at 350°C. The PEEK can fill the microcracks in the composite at a high temperature and can also cover the hard abrasive particles to prevent them from directly damaging the composite. The findings from this study afford a foundation for studies to further improve the properties of resin‐based friction materials.

Förderung

  • Department of Science and Technology of Jilin Province

Zitieren

APA

Li, L., Gao, G., Tong, J., Zhuang, J., Song, W., Ma, Y., Liu, G., Cao, F., Yuan, S., & Zhang, Q. (2023). Tribological and mechanical behaviours of resin‐based friction materials based on microcrack filling. Biosurface and Biotribology, 9(1), 1-8. https://doi.org/10.1049/bsb2.12055

Vancouver

Li L, Gao G, Tong J, Zhuang J, Song W, Ma Y, et al. Tribological and mechanical behaviours of resin‐based friction materials based on microcrack filling. Biosurface and Biotribology. 2023;9(1):1-8. doi:10.1049/bsb2.12055

BibTeX
@article{Li2023,
  author = {Li, Lekai and Gao, Guixiong and Tong, Jin and Zhuang, Jian and Song, Wei and Ma, Yunhai and Liu, Guoqin and Cao, Feipeng and Yuan, Shengwang and Zhang, Qifeng},
  title = {Tribological and mechanical behaviours of resin‐based friction materials based on microcrack filling},
  journal = {Biosurface and Biotribology},
  year = {2023},
  volume = {9},
  number = {1},
  pages = {1--8},
  doi = {10.1049/bsb2.12055}
}
Kostenlos starten →