EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Enhancing the pull-out behavior of ribbed steel bars in CNT-modified UHPFRC using recycled steel fibers from waste tires: a multiscale finite element study

Majid Pouraminian, Amir Ebrahim Akbari Baghal, Keyvan Andalibi, Farshid Khosravi, Vahid Arab Maleki

Scientific Reports · 27.08.2024 · 14 (1)

DOI: 10.1038/s41598-024-68682-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Reports, online erschienen am 27.08.2024. Verfasst von Majid Pouraminian und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Ramsar Branch, Islamic Azad University, Ramsar, Iran. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the current investigation, the effect of recycled steel fibers recovered from waste tires on the pull-out response of ribbed steel bars from carbon nanotube (CNT)-modified ultrahigh performance fiber reinforced concrete (UHPFRC) was considered using the multiscale finite element method (MSFEM). The MSFEM is based on three phases to simulate CNT-modified UHPC, recycled steel fibers (RSFs), and ribbed steel bars. For the first time, a bar ribbed has been simulated to make more realistic assumptions, and RSFs have been distributed in the form of curved cylinders of different lengths and with a random distribution within a concrete matrix. The interaction of the steel bar and the RSFs with the concrete is applied by the cohesive zone model (CZM). After confirming the simulation outcomes with the experimental results, the steel bar pull-out response is investigated using load-slip curves. The impact of the CNT content, RSFs and their aspect ratio on the bond strength of steel bars and CNT-modified UHPFRC was assessed. The results show that using RSFs with a lower aspect ratio (steel microfibers) significantly improves the pull-out characteristics of steel bars from concrete. Accordingly, the proposed MSFEM is considered for simulating the effects of different parameters on the pull-out response of ribbed steel bars from concrete without causing complex, time-consuming, or costly experiments. The results indicated that waste fiber or RSF can be used as a toughening component in CNT-modified ultrahigh-performance concrete and as a replacement for industrial steel fibers.

Schlagwörter

Stichwörter der Autor:innen

Bond behaviorCarbon nanotubeFinite element methodIrregular steel fiberUltrahigh-performance fiber reinforcement concrete

Autor:innen und Institutionen

  • Department of Civil Engineering, Ramsar Branch, Islamic Azad University, Ramsar, Iran.
  • Department of Civil Engineering, Bostan Abad Branch, Islamic Azad University, Bostan Abad, Iran.
  • Department of Civil Engineering, University of Tabriz, Tabriz, Iran.
  • Mechanical Engineering Department, Faculty of Engineering, Manisa Celal Bayar University, Manisa, Turkey. Farshid.khosravi09@gmail.com.
  • Department of Mechanical Engineering, University of Maragheh, Maragheh, Iran. Vahid_maleki@tabrizu.ac.ir.

Zitieren

APA

Pouraminian, M., Akbari Baghal, A. E., Andalibi, K., Khosravi, F., & Arab Maleki, V. (2024). Enhancing the pull-out behavior of ribbed steel bars in CNT-modified UHPFRC using recycled steel fibers from waste tires: a multiscale finite element study. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-68682-3

Vancouver

Pouraminian M, Akbari Baghal AE, Andalibi K, Khosravi F, Arab Maleki V. Enhancing the pull-out behavior of ribbed steel bars in CNT-modified UHPFRC using recycled steel fibers from waste tires: a multiscale finite element study. Scientific Reports. 2024;14(1). doi:10.1038/s41598-024-68682-3

BibTeX
@article{Pouraminian2024,
  author = {Pouraminian, Majid and Akbari Baghal, Amir Ebrahim and Andalibi, Keyvan and Khosravi, Farshid and Arab Maleki, Vahid},
  title = {Enhancing the pull-out behavior of ribbed steel bars in CNT-modified UHPFRC using recycled steel fibers from waste tires: a multiscale finite element study},
  journal = {Scientific Reports},
  year = {2024},
  volume = {14},
  number = {1},
  doi = {10.1038/s41598-024-68682-3}
}
Kostenlos starten →