EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing

Omid Daqiq, Charlotte Christina Roossien, Frederik Wilhelm Wubs, Baucke van Minnen

Scientific Reports · 23.05.2024 · 14 (1)

DOI: 10.1038/s41598-024-62011-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Reports, online erschienen am 23.05.2024. Verfasst von Omid Daqiq und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, University Medical Center Groningen, University of Groningen, Hanzeplein 1, 9713 GZ, Groningen, The Net…. Hauptthemen laut MEDLINE: Mandibular Fractures, Finite Element Analysis, Mandible, Bone Plates. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The clinical finite element analysis (FEA) application in maxillofacial surgery for mandibular fracture is limited due to the lack of a validated FEA model. Therefore, this study aims to develop a validated FEA model for mandibular fracture treatment, by assessing non-comminuted mandibular fracture fixation. FEA models were created for mandibles with single simple symphysis, parasymphysis, and angle fractures; fixated with 2.0 mm 4-hole titanium miniplates located at three different configurations with clinically known differences in stability, namely: superior border, inferior border, and two plate combinations. The FEA models were validated with series of Synbone polymeric mandible mechanical testing (PMMT) using a mechanical test bench with an identical test set-up. The first outcome was that the current understanding of stable simple mandibular fracture fixation was reproducible in both the FEA and PMMT. Optimal fracture stability was achieved with the two plate combination, followed by superior border, and then inferior border plating. Second, the FEA and the PMMT findings were consistent and comparable (a total displacement difference of 1.13 mm). In conclusion, the FEA and the PMMT outcomes were similar, and hence suitable for simple mandibular fracture treatment analyses. The FEA model can possibly be applied for non-routine complex mandibular fracture management.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Mandibular FracturesFinite Element AnalysisMandibleBone PlatesFracture Fixation, InternalHumansBiomechanical PhenomenaMechanical TestsTitaniumStress, MechanicalPolymers

Substanzen

TitaniumPolymers

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Surgery, University Medical Center Groningen, University of Groningen, Hanzeplein 1, 9713 GZ, Groningen, The Netherlands. o.daqiq@umcg.nl.
  • Engineering and Technology Institute Groningen, Department of Bio-Inspired MEMS and Biomedical Devices, University of Groningen, Nijenborgh 4, 9747 AG, Groningen, The Netherlands.
  • Bernoulli Institute for Mathematics, Computer Science and Artificial Intelligence, University of Groningen, Nijenborgh 9, 9747 AG, Groningen, The Netherlands.
  • Department of Oral and Maxillofacial Surgery, University Medical Center Groningen, University of Groningen, Hanzeplein 1, 9713 GZ, Groningen, The Netherlands.

Zitieren

APA

Daqiq, O., Roossien, C. C., Wubs, F. W., & van Minnen, B. (2024). Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-62011-4

Vancouver

Daqiq O, Roossien CC, Wubs FW, van Minnen B. Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing. Scientific Reports. 2024;14(1). doi:10.1038/s41598-024-62011-4

BibTeX
@article{Daqiq2024,
  author = {Daqiq, Omid and Roossien, Charlotte Christina and Wubs, Frederik Wilhelm and van Minnen, Baucke},
  title = {Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing},
  journal = {Scientific Reports},
  year = {2024},
  volume = {14},
  number = {1},
  doi = {10.1038/s41598-024-62011-4}
}
Kostenlos starten →