Efficient conversion of syngas to linear α-olefins by phase-pure χ-Fe5C2
Nature · 07.11.2024 · 635 (8037) · 102-107
DOI: 10.1038/s41586-024-08078-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nature, online erschienen am 16.10.2024. Verfasst von Peng Wang und 14 weiteren Autor:innen. Beteiligte Einrichtung: CTL Technology Research Center, National Institute of Clean-and-Low-Carbon Energy, CHN Energy, Beijing, People's Republic of China. peng.wang.hm@chne…. Die Arbeit wurde bisher 121-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Oil has long been the dominant feedstock for producing fuels and chemicals, but coal, natural gas and biomass are increasingly explored alternatives 1–3 . Their conversion first generates syngas, a mixture of CO and H 2 , which is then processed further using Fischer–Tropsch (FT) chemistry. However, although commercial FT technology for fuel production is established, using it to access valuable chemicals remains challenging. A case in point is linear α-olefins (LAOs), which are important chemical intermediates obtained by ethylene oligomerization at present 4–8 . The commercial high-temperature FT process and the FT-to-olefin process under development at present both convert syngas directly to LAOs, but also generate much CO 2 waste that leads to a low carbon utilization efficiency 9–14 . The efficiency is further compromised by substantially fewer of the converted carbon atoms ending up as valuable C 5 –C 10 LAOs than are found in the C 2 –C 4 olefins that dominate the product mixtures 9–14 . Here we show that the use of the original phase-pure χ-iron carbide can minimize these syngas conversion problems: tailored and optimized for the process of FT to LAOs, this catalyst exhibits an activity at 290 °C that is 1–2 orders higher than dedicated FT-to-olefin catalysts can achieve above 320 °C (refs. 12–15 ), is stable for 200 h, and produces desired C 2 –C 10 LAOs and unwanted CO 2 with carbon-based selectivities of 51% and 9% under industrially relevant conditions. This higher catalytic performance, persisting over a wide temperature range (250–320 °C), demonstrates the potential of the system for developing a practically relevant technology.
Autor:innen und Institutionen
- CTL Technology Research Center, National Institute of Clean-and-Low-Carbon Energy, CHN Energy, Beijing, People's Republic of China. peng.wang.hm@chnenergy.com.cn.
- Laboratory of Inorganic Materials and Catalysis, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Eindhoven, The Netherlands. peng.wang.hm@chnenergy.com.cn.
- CTL Technology Research Center, National Institute of Clean-and-Low-Carbon Energy, CHN Energy, Beijing, People's Republic of China.
- Laboratory of Inorganic Materials and Catalysis, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, Eindhoven, The Netherlands.
- Fundamental Aspects of Materials and Energy Group, Delft University of Technology, Delft, The Netherlands.
- Data Technology Group, China Energy Investment Group Archives, CHN Energy, Beijing, People's Republic of China.
Zitieren
APA
Wang, P., Chiang, F. K., Chai, J., Dugulan, A. I., Dong, J., Chen, W., Broos, R. J. P., Feng, B., Song, Y., Lv, Y., Lin, Q., Wang, R., Filot, I. A. W., Men, Z., & Hensen, E. J. M. (2024). Efficient conversion of syngas to linear α-olefins by phase-pure χ-Fe5C2. Nature, 635(8037), 102-107. https://doi.org/10.1038/s41586-024-08078-5
Vancouver
Wang P, Chiang FK, Chai J, Dugulan AI, Dong J, Chen W, et al. Efficient conversion of syngas to linear α-olefins by phase-pure χ-Fe5C2. Nature. 2024;635(8037):102-107. doi:10.1038/s41586-024-08078-5
BibTeX
@article{Wang2024,
author = {Wang, Peng and Chiang, Fu-Kuo and Chai, Jiachun and Dugulan, A Iulian and Dong, Juan and Chen, Wei and Broos, Robin J P and Feng, Bo and Song, Yuanjun and Lv, Yijun and Lin, Quan and Wang, Rongming and Filot, Ivo A W and Men, Zhuowu and Hensen, Emiel J M},
title = {Efficient conversion of syngas to linear α-olefins by phase-pure χ-Fe5C2},
journal = {Nature},
year = {2024},
volume = {635},
number = {8037},
pages = {102--107},
doi = {10.1038/s41586-024-08078-5}
}
EUVIMED