EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydraulic River Models From ICESat‐2 Elevation and Water Surface Slope

Aske Folkmann Musaeus, Cécile Marie Margaretha Kittel, Jakob Luchner, Monica Coppo Frias, Peter Bauer‐Gottwein

Water Resources Research · 2024-06 · 60 (6)

DOI: 10.1029/2023wr036428 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Resources Research, online erschienen am 11.06.2024. Verfasst von Aske Folkmann Musaeus und 4 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovationsfonden.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Forecasting flood and drought events requires accurate modeling tools. Hydraulic river models are based on estimates of riverbed geometry which are traditionally collected in situ. The novel Ice, Cloud and Land Elevation Satellite 2 [ICESat‐2] lidar altimetry mission with 6 simultaneous high‐resolution laser beams provides the opportunity to define river cross‐section geometries as well as observe water surface elevation [WSE] and water surface slope spatially resolved along the river chainage. This paper describes a method to utilize terrain altimetry and water surface slope estimates to define complete river geometries from ICESat‐2 data products, using the diffusive wave approximation to calculate depth in the submerged section not penetrated by the lidar. Exemplifying the method, cross‐sections are defined for a stretch of the Mekong River. Hydrodynamic model results of the stretch are compared with ICESat‐2 WSE estimates and in situ gauging station time series. Insights in river characteristics from satellite imagery and the ICESat‐2 slope estimates allow for fine‐tuning of the cross‐sections using spatially varying Manning numbers. The final model achieves a root mean square error against the ICESat‐2 WSE of 0.676 m and average Kling‐Gupta Efficiency against gauging station time series of 0.880. The method is limited by the diffusive wave approximation resulting in inaccurate cross‐section estimates in sections with supercritical flow or significant acceleration. Errors can be identified from ICESat‐2 WSE estimates and reduced with additional cross‐sections. Combined with hydrological models, the method will allow for cross‐section definition without in situ data.

Förderung

  • Innovationsfonden

Zitieren

APA

Musaeus, A. F., Kittel, C. M. M., Luchner, J., Frias, M. C., & Bauer‐Gottwein, P. (2024). Hydraulic River Models From ICESat‐2 Elevation and Water Surface Slope. Water Resources Research, 60(6). https://doi.org/10.1029/2023wr036428

Vancouver

Musaeus AF, Kittel CMM, Luchner J, Frias MC, Bauer‐Gottwein P. Hydraulic River Models From ICESat‐2 Elevation and Water Surface Slope. Water Resources Research. 2024;60(6). doi:10.1029/2023wr036428

BibTeX
@article{Musaeus2024,
  author = {Musaeus, Aske Folkmann and Kittel, Cécile Marie Margaretha and Luchner, Jakob and Frias, Monica Coppo and Bauer‐Gottwein, Peter},
  title = {Hydraulic River Models From ICESat‐2 Elevation and Water Surface Slope},
  journal = {Water Resources Research},
  year = {2024},
  volume = {60},
  number = {6},
  doi = {10.1029/2023wr036428}
}
Kostenlos starten →