EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of X‐Ray Computed Tomography Imaging Parameters on Quantification of Petrophysical Properties

M. F. Salek, L. E. Beckingham

Earth and Space Science · 2023-10 · 10 (10)

DOI: 10.1029/2023ea003095 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Earth and Space Science, online erschienen am 12.10.2023. Verfasst von M. F. Salek und 1 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three‐dimensional (3D) X‐ray computed tomography (X‐ray CT) imaging has emerged as a nondestructive means of microstructural characterization. However, obtaining and processing high‐quality and high‐resolution images is time‐consuming and often requires high‐performance computing, particularly with a high number of projections. This work evaluates the effect of 3D X‐ray CT imaging parameters on pore connectivity and surface area quantification in sandstone samples of varied composition. Samples from Bentheimer and Torrey Buff formations are imaged via 3D X‐ray CT imaging at resolutions ranging from 1.25 to 15 μm, bin sizes 1, 2, and 4, and number of projections from 400 to 4,500. Collected images are processed and analyzed using ImageJ and MATLAB to discern petrophysical properties and the results are compared with each other and Mercury Intrusion Capillary Pressure (MICP) results. Overall, little variation in bulk porosity with changing scanning parameters is observed. However, for low resolution and projection numbers, connected porosity is lower compared to bulk porosity due to a failure to capture microfeatures. Overall, mineral surface area is observed to decrease with increasing bin size, voxel size, and projection numbers, except an observed increase with projection numbers for Torrey Buff. The Torrey Buff samples contains comparatively more clays and even the highest resolution (1.25 μm) fails to separate the micrograins, which is reflected in the pore size distribution. Identifying these variations are helpful as discrepancies in imaged pore connectivity and surface area can largely impact assessments of fluid flow and transport in reactive transport simulations informed by this data.

Förderung

  • National Science Foundation

Zitieren

APA

Salek, M. F., & Beckingham, L. E. (2023). Effect of X‐Ray Computed Tomography Imaging Parameters on Quantification of Petrophysical Properties. Earth and Space Science, 10(10). https://doi.org/10.1029/2023ea003095

Vancouver

Salek MF, Beckingham LE. Effect of X‐Ray Computed Tomography Imaging Parameters on Quantification of Petrophysical Properties. Earth and Space Science. 2023;10(10). doi:10.1029/2023ea003095

BibTeX
@article{Salek2023,
  author = {Salek, M. F. and Beckingham, L. E.},
  title = {Effect of X‐Ray Computed Tomography Imaging Parameters on Quantification of Petrophysical Properties},
  journal = {Earth and Space Science},
  year = {2023},
  volume = {10},
  number = {10},
  doi = {10.1029/2023ea003095}
}
Kostenlos starten →