EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Crab Leg-Inspired Poly( p -phenylene benzobisoxazole) Hybrid Fibers for Boosting the Tribological Performance of UHMWPE Composites

Yaodong Xiao, Qunchao Zhang iD, Liang Tian, Xiaoqing Ming iD, Robert K Y Li, Wei Wu iD

Polymer Science & Technology · 22.09.2026 · 2 (9) · 713-727

DOI: 10.1021/polymscitech.6c00046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Science & Technology, online erschienen am 16.06.2026. Verfasst von Yaodong Xiao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Scie…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Xi?an Jiaotong University, Shaanxi Provincial Science and Technology Department, Key Research and Development Projects of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of ultra-high-molecular-weight polyethylene (UHMWPE) is frequently limited by issues such as low strength and wear resistance. Inspired by the hierarchical structure of crab legs, this study develops a hybrid fiber filler designed to synergistically enhance the tribological and mechanical properties of UHMWPE composites. The filler (PBO@PDA@ZnO) architecture utilizes poly(p-phenylene benzobisoxazole) (PBO) fibers as a rigid structural skeleton, employs polydopamine (PDA) as a functional intermediate layer, and incorporates uniformly loaded zinc oxide (ZnO) nanoparticles on the surface to create a “rigid skeleton-functional particle” system. The results indicate that the PBO@PDA@ZnO hybrid filler significantly optimizes both mechanical and tribological performance. Specifically, the UHMWPE composite reinforced with 1 wt % filler exhibits the best overall performance, with the elongation at break increasing from 650% to 850% while simultaneously improving tensile strength. Furthermore, under both low and high load conditions, the friction coefficient of the UHMWPE composite is all reduced by over 60%, and the wear rate is decreased by an order of magnitude, with the lowest value reaching 8.46 × 10–7 mm3/N·m. This superior performance is attributed to the synergistic effects of fiber reinforcement, stable transfer film formation, and the “micro-bearing” rolling effect of the ZnO nanoparticles. This study provides a biomimetic strategy for the fabrication of high-performance self-lubricating UHMWPE composites.

Schlagwörter

Stichwörter der Autor:innen

UHMWPEhybridpoly(p-phenylene benzobisoxazole)tribologywear resistance

Autor:innen und Institutionen

  • Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Science and Engineering, Manchester Metropolitan University Joint Institut…
  • Engineering Center for Superlubricity, Jihua Laboratory, Foshan, Guangdong Province 528200, China.
  • Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an, Shaanxi Province 710054, China.
  • Xi'an Key Laboratory of Sustainable Polymer Materials, School of Chemistry, Xi'an Jiaotong University, Xi'an, Shaanxi Province 710049, China.
  • Hong Kong Chu Hai College, Castle Peak Bay, New Territories, Hong Kong SAR 999077, China.

ORCID-Profile: Qunchao Zhang, Xiaoqing Ming, Wei Wu

Förderung

  • Xi?an Jiaotong University
  • Shaanxi Provincial Science and Technology Department
  • Key Research and Development Projects of Shaanxi Province
  • State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University
  • Shaanxi Province

Zitieren

APA

Xiao, Y., Zhang, Q., Tian, L., Ming, X., Li, R. K. Y., & Wu, W. (2026). Crab Leg-Inspired Poly( p -phenylene benzobisoxazole) Hybrid Fibers for Boosting the Tribological Performance of UHMWPE Composites. Polymer Science & Technology, 2(9), 713-727. https://doi.org/10.1021/polymscitech.6c00046

Vancouver

Xiao Y, Zhang Q, Tian L, Ming X, Li RKY, Wu W. Crab Leg-Inspired Poly( p -phenylene benzobisoxazole) Hybrid Fibers for Boosting the Tribological Performance of UHMWPE Composites. Polymer Science & Technology. 2026;2(9):713-727. doi:10.1021/polymscitech.6c00046

BibTeX
@article{Xiao2026,
  author = {Xiao, Yaodong and Zhang, Qunchao and Tian, Liang and Ming, Xiaoqing and Li, Robert K Y and Wu, Wei},
  title = {Crab Leg-Inspired Poly( p -phenylene benzobisoxazole) Hybrid Fibers for Boosting the Tribological Performance of UHMWPE Composites},
  journal = {Polymer Science & Technology},
  year = {2026},
  volume = {2},
  number = {9},
  pages = {713--727},
  doi = {10.1021/polymscitech.6c00046}
}
Kostenlos starten →