EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Visualizing Solar Cells at Work: An in Situ Sample Holder for Multimodal X-ray Nanoscopy under Realistic Operating Conditions

Rodrigo Szostak, Francesco R. Lena, Michel B. Machado, Natália A. Ferreira, Ângelo L. Gobbi, Maria H. O. Piazzetta, Francisco M. C. da Silva, Maria G. D. Guaita, Gabriel G. Basilio, Hugo K. B. Fernandes, Lucas S. Perissinotto, Leonardo M. Kofukuda und 2 weitere

Photon Science · 10.08.2026

DOI: 10.1021/photonsci.6c00013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photon Science, online erschienen am 10.08.2026. Verfasst von Rodrigo Szostak und 13 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: The S?o Paulo Research Foundation (FAPESP).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Here, we report the design, construction, and commissioning of a photovoltaic holder for in situ and operando characterization of solar cells at the TARUMÃ end station of the X-ray nanoprobe CARNAÚBA at the SIRIUS synchrotron light source of LNLS/CNPEM. The holder enables the investigation of complete solar cells using X-ray microscopy techniques. It was developed with precision-engineering design principles to achieve nanometer-level position stability and minimize thermal drift. The holder also allows precise control of temperature in the target area, atmosphere, illumination, and bias. These features enable the simulation of real solar cell operation. The holder supports various X-ray-based techniques, such as X-ray fluorescence, X-ray diffraction, and X-ray absorption spectroscopy, all with nanoscale capabilities. Infrared images revealed a homogeneous temperature distribution inside the 3 × 3 mm target area. During heating, horizontal displacement was minimal. Vertical displacement reached 5 μm at 120 °C but was reversible upon returning to room temperature. At stable temperatures, the holders showed better position stability than the beam size. Photovoltaic characterization was demonstrated, along with chemical structural mapping using X-ray microscopy for different techniques. In summary, this paper presents an in situ and operando platform for correlative chemical-structural nanoscale mapping of solar cells using multiple techniques with controlled environmental parameters.

Förderung

  • The S?o Paulo Research Foundation (FAPESP)

Zitieren

APA

Szostak, R., Lena, F. R., Machado, M. B., Ferreira, N. A., Gobbi, A. L., Piazzetta, M. H. O., Silva, F. M. C. D., Guaita, M. G. D., Basilio, G. G., Fernandes, H. K. B., Perissinotto, L. S., Kofukuda, L. M., Geraldes, R. R., & Tolentino, H. C. N. (2026). Visualizing Solar Cells at Work: An in Situ Sample Holder for Multimodal X-ray Nanoscopy under Realistic Operating Conditions. Photon Science. https://doi.org/10.1021/photonsci.6c00013

Vancouver

Szostak R, Lena FR, Machado MB, Ferreira NA, Gobbi AL, Piazzetta MHO, et al. Visualizing Solar Cells at Work: An in Situ Sample Holder for Multimodal X-ray Nanoscopy under Realistic Operating Conditions. Photon Science. 2026. doi:10.1021/photonsci.6c00013

BibTeX
@article{Szostak2026,
  author = {Szostak, Rodrigo and Lena, Francesco R. and Machado, Michel B. and Ferreira, Natália A. and Gobbi, Ângelo L. and Piazzetta, Maria H. O. and Silva, Francisco M. C. da and Guaita, Maria G. D. and Basilio, Gabriel G. and Fernandes, Hugo K. B. and Perissinotto, Lucas S. and Kofukuda, Leonardo M. and Geraldes, Renan R. and Tolentino, Hélio C. N.},
  title = {Visualizing Solar Cells at Work: An in Situ Sample Holder for Multimodal X-ray Nanoscopy under Realistic Operating Conditions},
  journal = {Photon Science},
  year = {2026},
  doi = {10.1021/photonsci.6c00013}
}
Kostenlos starten →