Continuous Production of Mesoporous Silica with Controlled Structure via Aerosol-Assisted Evaporation-Induced Self-Assembly
Chem & Bio Engineering · 24.09.2026 · 3 (9) · 793-808
DOI: 10.1021/cbe.6c00038 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chem & Bio Engineering, online erschienen am 22.06.2026. Verfasst von Ibrahim A Alnutaifi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nature Inspired Engineering and Department of Chemical Engineering, University College London, London WC1E 7JE, United Kingdom. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Saudi Aramco, Engineering and Physical Sciences Research Council (EPSRC).
Abstract (Originalsprache)
This work demonstrates a viable and attractive continuous synthesis route for spherical SBA-15 mesoporous silica particles using the aerosol-assisted evaporation-induced self-assembly (AA-EISA) technique. This approach integrates aerosol processing with a self-assembly mechanism driven by solvent evaporation, offering distinct advantages over conventional sol–gel and hydrothermal methods. The influence of ethanol content, pH, P123 template amount, and reactor temperature (Tr) on the formation of SBA-15 spheres was systematically investigated using gas physisorption, thermogravimetric analysis (TGA), small-angle X-ray scattering (SAXS), and electron microscopy. In the absence of ethanol, the desired spherical morphology was not obtained; instead, the products consisted of mixed, fiber-like elongated features and bundled aggregates, highlighting ethanol’s pivotal role in directing spherical particle formation. An ethanol/tetraethyl orthosilicate (TEOS) molar ratio of 1 was sufficient to maintain a spherical morphology during continuous runs up to 12 h. For production extending beyond 12 h, a ratio of 3 was required to ensure precursor stability and to balance surface area with pore volume. Adjusting the pH to 3 enabled pore expansion to ∼20 nm and a pore volume of 1 cm3/g, with a moderate surface area of 194 m2/g. Lower ethanol and acid usage suggest a more sustainable process. A P123/TEOS molar ratio of 0.015 was sufficient to yield well-ordered mesostructures with minimal reactor fouling. Reducing Tr from 400 to 200 °C decreased energy consumption without sacrificing quality, however, a further reduction to 120 °C compromised the morphology. Key parameters affecting continuous AA-EISA production are given, showing potential for a robust, energy-efficient, and environmentally conscious route to produce mesoporous silica particles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Nature Inspired Engineering and Department of Chemical Engineering, University College London, London WC1E 7JE, United Kingdom.
ORCID-Profile: Marc-Olivier Coppens
Förderung
- Saudi Aramco
- Engineering and Physical Sciences Research Council (EPSRC)
Zitieren
APA
Alnutaifi, I. A., Kapil, N., & Coppens, M. O. (2026). Continuous Production of Mesoporous Silica with Controlled Structure via Aerosol-Assisted Evaporation-Induced Self-Assembly. Chem & Bio Engineering, 3(9), 793-808. https://doi.org/10.1021/cbe.6c00038
Vancouver
Alnutaifi IA, Kapil N, Coppens MO. Continuous Production of Mesoporous Silica with Controlled Structure via Aerosol-Assisted Evaporation-Induced Self-Assembly. Chem & Bio Engineering. 2026;3(9):793-808. doi:10.1021/cbe.6c00038
BibTeX
@article{Alnutaifi2026,
author = {Alnutaifi, Ibrahim A and Kapil, Nidhi and Coppens, Marc-Olivier},
title = {Continuous Production of Mesoporous Silica with Controlled Structure via Aerosol-Assisted Evaporation-Induced Self-Assembly},
journal = {Chem & Bio Engineering},
year = {2026},
volume = {3},
number = {9},
pages = {793--808},
doi = {10.1021/cbe.6c00038}
}
EUVIMED