EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Photosynthetic Biomanufacturing in Mechanically Robust, 3D Printed Hydrogels

Jayce E Taylor, Kinsey Drake, Nhu Tong iD, Jada A Bezue, Alshakim Nelson iD, Shota Atsumi iD

ACS Synthetic Biology · 21.11.2025 · 14 (11) · 4439-4446

DOI: 10.1021/acssynbio.5c00366 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Synthetic Biology, online erschienen am 29.10.2025. Verfasst von Jayce E Taylor und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of California, Davis, Davis, California 95616, United States. Hauptthemen laut MEDLINE: Hydrogels, Synechococcus, Printing, Three-Dimensional, Photosynthesis. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIH HHS, National Science Foundation, University of California, Davis.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Engineered living materials (ELMs) integrate synthetic polymers with engineered cells to create systems that sense, respond, and adapt to their environment. While promising as sustainable alternatives to traditional materials, ELMs remain underexplored for use with photoautotrophic organisms. In this study, we evaluate the viability of the cyanobacterium Synechococcus elongatus PCC 7942, which converts carbon dioxide into valuable chemicals using light energy, in three hydrogel matrices previously shown to support heterotrophic cells. S. elongatus remained viable and metabolically active only in a hydrogel formed from bovine serum albumin-conjugated acrylates. When engineered to produce 2,3-butanediol (23BDO), encapsulated cells generated 719 mg L-1 over four days. Incorporating cells increased the compressive modulus of the material, while accumulated 23BDO reduced it, indicating that bioproduction influences mechanical properties. Fluorescence imaging confirmed high viability and physical immobilization. These results establish that cyanobacteria-based ELMs can enable autotrophic chemical production while modulating material mechanics for sustainable applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrogelsSynechococcusPrinting, Three-DimensionalPhotosynthesisButylene GlycolsSerum Albumin, Bovine

Stichwörter der Autor:innen

biomaterialscyanobacteriaengineered living materialsengineered living systemsmetabolic engineering

Substanzen

HydrogelsButylene Glycols2,3-butylene glycolSerum Albumin, Bovine

Autor:innen und Institutionen

  • Department of Chemistry, University of California, Davis, Davis, California 95616, United States.
  • Department of Chemistry, University of Washington, Seattle, Washington 98195, United States.

ORCID-Profile: Nhu Tong, Alshakim Nelson, Shota Atsumi

Förderung

  • NIH HHS
  • National Science Foundation
  • University of California, Davis

Zitieren

APA

Taylor, J. E., Drake, K., Tong, N., Bezue, J. A., Nelson, A., & Atsumi, S. (2025). Photosynthetic Biomanufacturing in Mechanically Robust, 3D Printed Hydrogels. ACS Synthetic Biology, 14(11), 4439-4446. https://doi.org/10.1021/acssynbio.5c00366

Vancouver

Taylor JE, Drake K, Tong N, Bezue JA, Nelson A, Atsumi S. Photosynthetic Biomanufacturing in Mechanically Robust, 3D Printed Hydrogels. ACS Synthetic Biology. 2025;14(11):4439-4446. doi:10.1021/acssynbio.5c00366

BibTeX
@article{Taylor2025,
  author = {Taylor, Jayce E and Drake, Kinsey and Tong, Nhu and Bezue, Jada A and Nelson, Alshakim and Atsumi, Shota},
  title = {Photosynthetic Biomanufacturing in Mechanically Robust, 3D Printed Hydrogels},
  journal = {ACS Synthetic Biology},
  year = {2025},
  volume = {14},
  number = {11},
  pages = {4439--4446},
  doi = {10.1021/acssynbio.5c00366}
}
Kostenlos starten →