EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decontaminating Plastic Recyclates via Solvothermal Extraction of Brominated Flame Retardants

Nea Heilala, Ville H. Nissinen, Paavo Auvinen, Ilkka Rytöluoto, Erno Karjalainen, Jarkko J. Saarinen, Janne Jänis

ACS Sustainable Resource Management · 23.04.2026 · 3 (4) · 1192-1204

DOI: 10.1021/acssusresmgt.6c00017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Resource Management, online erschienen am 03.04.2026. Verfasst von Nea Heilala und 6 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Health and Digital Executive Agency, Research Council of Finland, Biocenter Finland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Removing hazardous additives, such as brominated flame retardants (BFRs), from plastics is essential for mitigating the environmental burden of BFR-contaminated plastic recyclates. In this study, bromine-rich acrylonitrile–butadiene–styrene (ABS) and high-impact polystyrene (HIPS) samples from a recycling facility were extracted in an autoclave using mixtures of water, isopropanol (IPA), and sodium hydroxide (NaOH) as solvents. The total bromine content of the samples was quantified by X-ray fluorescence (XRF), while organic additives were analyzed using direct insertion probe mass spectrometry (DIP-MS). Initial characterization revealed the presence of multiple BFRs and other additives in both recyclates. Through process optimization, covering extraction time, temperature, and solvent composition, the solvothermal extraction methods proved effective in removing these additives. For the ABS sample, the H2O/IPA/NaOH extraction allowed efficient bromine removal (94%) at 125 °C, while for r-HIPS, the highest bromine removal (69%) was achieved through repeated extractions using IPA/NaOH at 100 °C. Intriguingly, extraction selectivity could be tuned by adjusting the extraction conditions and solvent composition. Overall, the findings highlighted that the extraction process should be optimized for each specific waste composition. The applied protocol, utilizing relatively mild conditions and environmentally friendly solvents, holds the potential for enhancing plastic recyclability and reducing the environmental impact of BFRs.

Förderung

  • European Health and Digital Executive Agency
  • Research Council of Finland
  • Biocenter Finland

Zitieren

APA

Heilala, N., Nissinen, V. H., Auvinen, P., Rytöluoto, I., Karjalainen, E., Saarinen, J. J., & Jänis, J. (2026). Decontaminating Plastic Recyclates via Solvothermal Extraction of Brominated Flame Retardants. ACS Sustainable Resource Management, 3(4), 1192-1204. https://doi.org/10.1021/acssusresmgt.6c00017

Vancouver

Heilala N, Nissinen VH, Auvinen P, Rytöluoto I, Karjalainen E, Saarinen JJ, et al. Decontaminating Plastic Recyclates via Solvothermal Extraction of Brominated Flame Retardants. ACS Sustainable Resource Management. 2026;3(4):1192-1204. doi:10.1021/acssusresmgt.6c00017

BibTeX
@article{Heilala2026,
  author = {Heilala, Nea and Nissinen, Ville H. and Auvinen, Paavo and Rytöluoto, Ilkka and Karjalainen, Erno and Saarinen, Jarkko J. and Jänis, Janne},
  title = {Decontaminating Plastic Recyclates via Solvothermal Extraction of Brominated Flame Retardants},
  journal = {ACS Sustainable Resource Management},
  year = {2026},
  volume = {3},
  number = {4},
  pages = {1192--1204},
  doi = {10.1021/acssusresmgt.6c00017}
}
Kostenlos starten →