Corporate Carbon Footprint and Scope 3 Emissions in Stainless Steel Electric Arc Furnace Steelmaking: A Step To Tackle Climate Change
ACS Sustainable Resource Management · 26.02.2026 · 3 (2) · 589-601
DOI: 10.1021/acssusresmgt.5c00588 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Resource Management, online erschienen am 06.02.2026. Verfasst von Luca Testini und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electric Arc Furnace (EAF) steelmaking is generally less carbon-intensive than primary production routes; however, stainless steel production involves significant upstream Scope 3 emissions that are critical for comprehensive carbon accounting. This study presents a corporate carbon footprint (CF) analysis, based on primary data, of an EAF steelworks producing stainless steel long products, conducted according to ISO 14064:2019, GHG Protocol guidelines, and relevant Product Category Rules. A cradle-to-gate analysis quantified Scopes 1, 2, and 3 emissions for a functional unit of 1 ton of stainless steel produced. The total CF was determined to be 4.57 ton CO2,eq/tonSS, with Scope 3 emissions as the dominant contribution at approximately 70%. Upstream raw material production, primarily ferroalloys for chromium and nickel, drives ≈80% of Scope 3 emissions. Scope 1 emissions (14.7% of total CF) and Scope 2 emissions (15.1% of total CF) constituted smaller yet notable shares. A sensitivity analysis was conducted on Scope 1, Scope 2, and Scope 3 emissions, illustrating the main defossilization levers available to steelmakers. This reinforced the importance of Scope 3 emissions embedded in raw materials creating a shift for meaningful defossilization in scrap-based stainless steel production, which must be realized at the value chain level, overcoming the single steelmaking site.
Zitieren
APA
Testini, L., Misul, A., Morreale, V., Brocard, P., Persico, L., Mombelli, D., & Dotelli, G. (2026). Corporate Carbon Footprint and Scope 3 Emissions in Stainless Steel Electric Arc Furnace Steelmaking: A Step To Tackle Climate Change. ACS Sustainable Resource Management, 3(2), 589-601. https://doi.org/10.1021/acssusresmgt.5c00588
Vancouver
Testini L, Misul A, Morreale V, Brocard P, Persico L, Mombelli D, et al. Corporate Carbon Footprint and Scope 3 Emissions in Stainless Steel Electric Arc Furnace Steelmaking: A Step To Tackle Climate Change. ACS Sustainable Resource Management. 2026;3(2):589-601. doi:10.1021/acssusresmgt.5c00588
BibTeX
@article{Testini2026,
author = {Testini, Luca and Misul, Alessandro and Morreale, Vincenzo and Brocard, Philippe and Persico, Livia and Mombelli, Davide and Dotelli, Giovanni},
title = {Corporate Carbon Footprint and Scope 3 Emissions in Stainless Steel Electric Arc Furnace Steelmaking: A Step To Tackle Climate Change},
journal = {ACS Sustainable Resource Management},
year = {2026},
volume = {3},
number = {2},
pages = {589--601},
doi = {10.1021/acssusresmgt.5c00588}
}
EUVIMED