EUVIMEDEUVIMED entdecken
Crossref

Green Alginate Extraction from Macrocystis pyrifera for Bioplastic Applications: Physicochemical, Environmental Impact, and Chemical Hazard Analyses

Hayley A. Smith, Ludwig Paul B. Cabling, Nathaniel A. Leonard, Kristian L. Dubrawski, Heather L. Buckley

ACS Sustainable Resource Management · 23.05.2024 · 1 (5) · 958-969

DOI: 10.1021/acssusresmgt.4c00019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Resource Management, online erschienen am 14.05.2024. Verfasst von Hayley A. Smith und 4 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Canada Foundation for Innovation, University of Victoria, Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Resolution Image Download MS PowerPoint Slide To scale alginate production for widespread use, a focus on advancing sustainable extraction methods is needed. This study investigates greener extraction methods and their effect on alginate properties to advance sustainable methods suitable for bio-based plastic applications. Three alginate extraction protocols were selected by evaluating the hazard levels to human and environmental health of solvents and reagents used in 23 alginate extraction methods. The three methods were tested on samples of Macrocystis pyrifera algae and evaluated based on the efficiency of extraction, uronic acid composition (M/G ratio), molecular weight, and carbohydrate composition. Finally, the extraction methods were assessed using a partial life cycle assessment, assessing the water, chemical, and energy consumption and respective greenhouse gas emissions. The study found that the choice of extraction protocol significantly influenced the properties of the resulting alginate. Protocols 1 and 2, using operating conditions of high pH and temperature and short alkaline extraction times, produced alginates with a high M/G ratio (1.23 and 1.53, respectively) and comparable molecular weight to commercial alginate, but they had increased energy and water consumption and emissions (987 and 389 kg CO 2 -eq (CO 2 equivalents), respectively) compared to the other protocol evaluated. Protocol 3, using ambient conditions and an alkaline chelating sodium citrate treatment, resulted in alginates with a decreased M/G ratio (0.63), reduced greenhouse gas emissions (177 kg CO 2 -eq), and high yield (26.7%) but produced alginates with lower molecular weight (59.5 kDa). This research highlights the adaptability of extraction protocols for achieving the desired alginate properties and evaluates the safety and environmental implications of the selected methods.

Förderung

  • Canada Foundation for Innovation
  • University of Victoria
  • Natural Sciences and Engineering Research Council of Canada
  • British Columbia Knowledge Development Fund
  • Mitacs
  • Bioform Technologies

Zitieren

APA

Smith, H. A., Cabling, L. P. B., Leonard, N. A., Dubrawski, K. L., & Buckley, H. L. (2024). Green Alginate Extraction from Macrocystis pyrifera for Bioplastic Applications: Physicochemical, Environmental Impact, and Chemical Hazard Analyses. ACS Sustainable Resource Management, 1(5), 958-969. https://doi.org/10.1021/acssusresmgt.4c00019

Vancouver

Smith HA, Cabling LPB, Leonard NA, Dubrawski KL, Buckley HL. Green Alginate Extraction from Macrocystis pyrifera for Bioplastic Applications: Physicochemical, Environmental Impact, and Chemical Hazard Analyses. ACS Sustainable Resource Management. 2024;1(5):958-969. doi:10.1021/acssusresmgt.4c00019

BibTeX
@article{Smith2024,
  author = {Smith, Hayley A. and Cabling, Ludwig Paul B. and Leonard, Nathaniel A. and Dubrawski, Kristian L. and Buckley, Heather L.},
  title = {Green Alginate Extraction from Macrocystis pyrifera for Bioplastic Applications: Physicochemical, Environmental Impact, and Chemical Hazard Analyses},
  journal = {ACS Sustainable Resource Management},
  year = {2024},
  volume = {1},
  number = {5},
  pages = {958--969},
  doi = {10.1021/acssusresmgt.4c00019}
}
Kostenlos starten →