Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy
ACS Sustainable Chemistry & Engineering · 16.11.2026
DOI: 10.1021/acssuschemeng.6c10687 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 16.11.2026. Verfasst von Xin-Long Sha und 8 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: Yancheng City Key Research and Development Projects, Yancheng Fundamental Research Program.
Abstract (Originalsprache)
The development of high-performance thermosetting resins that simultaneously combine low-temperature processability, thermal stability, flame retardancy, and favorable dielectric properties remains challenging. In this work, a biobased benzoxazine monomer, UA-Fa, was synthesized from Urolithin A and furfurylamine through a solvent-free strategy. The molecular structure of UA-Fa was systematically elucidated by spectroscopic characterization, including 1H-1H NOESY NMR analysis. Owing to its unique molecular architecture and multiple reactive sites, UA-Fa exhibited a low curing peak temperature of 203 °C, enabling low-temperature fabrication of the corresponding thermoset poly(UA-Fa). The cured resin exhibited a high glass transition temperature of 303 °C, together with excellent mechanical properties, including a tensile strength of 91.4 ± 4.7 MPa, a Young's modulus of 6.57 ± 0.27 GPa, and a hardness of 0.62 ± 0.02 GPa. Compared with the commercial resin poly(DBA-Pa), poly(UA-Fa) exhibited substantially improved thermal stability and flame retardancy, with its initial decomposition temperature and char yield reaching 404 °C and 73%, respectively, compared with 330 °C and 38% for poly(DBA-Pa). Moreover, the peak heat release rate and total heat release of poly(UA-Fa) were only 39.2 W/g and 4.3 kJ/g, corresponding to reductions of approximately 76 and 80%, respectively, relative to poly(DBA-Pa). In addition, poly(UA-Fa) exhibited a low dielectric constant of 2.77–2.51 over 100 Hz–2 MHz and maintained a dielectric constant below 3 from room temperature to 300 °C at 1 GHz. These results demonstrate that rational incorporation of a rigid biobased aromatic framework and multiple reactive sites provides an effective strategy for achieving the synergistic combination of low-temperature curing, thermal stability, flame retardancy, mechanical robustness, and low dielectric properties in benzoxazine thermosets.
Förderung
- Yancheng City Key Research and Development Projects
- Yancheng Fundamental Research Program
Zitieren
APA
Sha, X., Yang, X., Zhu, D., Pan, Y., Yu, B., Yang, Z., Qian, B., Liu, Z., & Fei, Z. (2026). Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6c10687
Vancouver
Sha X, Yang X, Zhu D, Pan Y, Yu B, Yang Z, et al. Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy. ACS Sustainable Chemistry & Engineering. 2026. doi:10.1021/acssuschemeng.6c10687
BibTeX
@article{Sha2026,
author = {Sha, Xin-Long and Yang, Xiu-Zhi and Zhu, Da-Liang and Pan, Yunying and Yu, Bingbing and Yang, Zhenyu and Qian, Binbin and Liu, Zongtang and Fei, Zhenghao},
title = {Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
doi = {10.1021/acssuschemeng.6c10687}
}
EUVIMED