EUVIMEDEUVIMED entdecken
Crossref

Closed-Loop Fabrication of Regenerated Cellulose Battery Separator via Solvent-Guided Structural Regulation

Yangyang Zhang, Lulu Ren, Latdavanh Phiaxaixalakham, Wentian Song, Yuanyuan Li, Yifeng Chu, Qinfeng He, Zhikun Wang, Xuejun Yu

ACS Sustainable Chemistry & Engineering · 13.11.2026

DOI: 10.1021/acssuschemeng.6c08681 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 13.11.2026. Verfasst von Yangyang Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: Zhejiang A and F University, State Key Laboratory for Development and Utilization of Forest Food Resources.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of battery separators derived from renewable feedstocks that can simultaneously achieve high porosity, robust mechanical strength, excellent thermal stability, reliable electrochemical performance, and satisfactory environmental sustainability remains a core challenge in the field of sustainable energy storage material. Herein, we report a regenerated cellulose membrane prepared through a dissolution/regeneration process using lithium bromide Molecular dynamics simulation results show that water is the effective antisolvent for driving the formation of cellulose–cellulose H-bonds, yielding cellulose with a better crystalline structure. Subsequently, tert-butanol was utilized to replace water in the cellulose membrane precursor prior to drying, preventing capillary-induced pore collapse. This membrane exhibits high porosity of 70.1%, excellent electrolyte uptake capacity of 243.7%, ionic conductivity of 0.77 mS/cm, excellent thermal stability (no shrinkage at 150 °C), and roust mechanical strength. The Na/HC half-cells assembled with this membrane displays high cycle capacity retention rate of 87.1% at 0.1 C after 500 cycles, which is comparable to commercial separators. This membrane fabrication process enables closed-loop solvent recycling, and the membrane fully degraded after 4 months of soil burial, and life cycle assessment indicated lower impacts than commercial battery separators. These results establish a practical closed-loop strategy for sustainable, high-performance battery separators.

Förderung

  • Zhejiang A and F University
  • State Key Laboratory for Development and Utilization of Forest Food Resources

Zitieren

APA

Zhang, Y., Ren, L., Phiaxaixalakham, L., Song, W., Li, Y., Chu, Y., He, Q., Wang, Z., & Yu, X. (2026). Closed-Loop Fabrication of Regenerated Cellulose Battery Separator via Solvent-Guided Structural Regulation. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6c08681

Vancouver

Zhang Y, Ren L, Phiaxaixalakham L, Song W, Li Y, Chu Y, et al. Closed-Loop Fabrication of Regenerated Cellulose Battery Separator via Solvent-Guided Structural Regulation. ACS Sustainable Chemistry & Engineering. 2026. doi:10.1021/acssuschemeng.6c08681

BibTeX
@article{Zhang2026,
  author = {Zhang, Yangyang and Ren, Lulu and Phiaxaixalakham, Latdavanh and Song, Wentian and Li, Yuanyuan and Chu, Yifeng and He, Qinfeng and Wang, Zhikun and Yu, Xuejun},
  title = {Closed-Loop Fabrication of Regenerated Cellulose Battery Separator via Solvent-Guided Structural Regulation},
  journal = {ACS Sustainable Chemistry & Engineering},
  year = {2026},
  doi = {10.1021/acssuschemeng.6c08681}
}
Kostenlos starten →