EUVIMEDEUVIMED entdecken
Crossref

Sustainable Closed-Pore Engineering of Biomass-Derived Hard Carbon via LPRA Crosslinking for Efficient Sodium Storage

Zhenbing Sun, Haifeng Zuo, Lin Zhao, Yujun Li, Qi Yu, Zhenrui Li, Qinxuan Shi, Lili Shang, Xing’e Liu

ACS Sustainable Chemistry & Engineering · 05.11.2026

DOI: 10.1021/acssuschemeng.6c07496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 05.11.2026. Verfasst von Zhenbing Sun und 8 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Gefördert von: International Centre for Bamboo and Rattan, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biomass-derived hard carbon is considered a promising anode material for sodium-ion batteries (SIBs) because of its low cost, sustainability, and tunable microstructure. However, the efficient construction of closed pores for sodium storage remains a major challenge. Herein, a simple and efficient strategy based on lignin-based phenolic resin adhesive (LPRA) crosslinking is proposed to induce open-to-closed pore conversion in biomass-derived hard carbon. During curing and subsequent pyrolysis at 1500 °C, the LPRA-derived crosslinked network promotes pore sealing and pore fusion, leading to the in situ formation of abundant closed pores within activated carbon frameworks and providing sufficient sodium-storage space. Structural characterization demonstrates that open pores with sizes of 1.23 and 1.14 nm are extensively converted into closed pores after LPRA incorporation and high-temperature carbonization. Benefiting from the engineered closed-pore architecture, the optimized sample (ACPC-2) exhibits markedly enhanced electrochemical performance. The capacity reaches 2.32 times that of ACC-2, while the initial coulombic efficiency increases to 89.85%. In addition, a high capacity retention of 93.49% is maintained after 100 cycles at 300 mA g–1. Combined in situ and ex situ characterizations further reveal distinct sodium-storage behaviors in hard carbons with different pore structures. In particular, ACPC-2 predominantly stores sodium through sodium-cluster filling within closed pores, which contributes dominantly to the capacity. This work provides a low-cost and sustainable strategy for converting biomass-derived carbon into high-value closed-pore hard carbon and offers useful insights into pore evolution and sodium-storage behavior for the development of high-performance SIB anodes.

Förderung

  • International Centre for Bamboo and Rattan
  • National Natural Science Foundation of China

Zitieren

APA

Sun, Z., Zuo, H., Zhao, L., Li, Y., Yu, Q., Li, Z., Shi, Q., Shang, L., & Liu, X. (2026). Sustainable Closed-Pore Engineering of Biomass-Derived Hard Carbon via LPRA Crosslinking for Efficient Sodium Storage. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6c07496

Vancouver

Sun Z, Zuo H, Zhao L, Li Y, Yu Q, Li Z, et al. Sustainable Closed-Pore Engineering of Biomass-Derived Hard Carbon via LPRA Crosslinking for Efficient Sodium Storage. ACS Sustainable Chemistry & Engineering. 2026. doi:10.1021/acssuschemeng.6c07496

BibTeX
@article{Sun2026,
  author = {Sun, Zhenbing and Zuo, Haifeng and Zhao, Lin and Li, Yujun and Yu, Qi and Li, Zhenrui and Shi, Qinxuan and Shang, Lili and Liu, Xing’e},
  title = {Sustainable Closed-Pore Engineering of Biomass-Derived Hard Carbon via LPRA Crosslinking for Efficient Sodium Storage},
  journal = {ACS Sustainable Chemistry & Engineering},
  year = {2026},
  doi = {10.1021/acssuschemeng.6c07496}
}
Kostenlos starten →