EUVIMEDEUVIMED entdecken
Crossref

High-Temperature Damage Recovery of Waste Glass Cementitious Materials: Thermodynamic Prediction and Experimental Validation

Xudong Zhao, Yujie Huang, Jian-Xin Lu, Ao Zhou, Martin Cyr, Doo-Yeol Yoo, Chi Sun Poon

ACS Sustainable Chemistry & Engineering · 20.11.2026

DOI: 10.1021/acssuschemeng.6c06976 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 20.11.2026. Verfasst von Xudong Zhao und 6 weiteren Autor:innen. Die Arbeit nennt 103 Literaturangaben. Gefördert von: Research Grants Council, University Grants Committee, Basic and Applied Basic Research Foundation of Guangdong Province, Construction Industry Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A critical challenge for fire-resilient infrastructure lies in the inherent thermal instability of conventional cementitious composites under extreme temperatures. To address this gap, this study investigated the dosage-dependent effects of recycled glass powder (GP) in the high-temperature response of cementitious materials. Thermodynamic simulations were first used to predict GP dosage-dependent liquid-phase formation, melt viscosity, and phase assemblage evolution, and the predicted sintering window was then experimentally evaluated. The results showed that GP incorporation promoted the formation of thermally stable crystalline phases, such as rankinite, akermanite, and gehlenite, while reducing the generation of detrimental free CaO and γ-C2S. At 30% GP replacement, the paste exhibited the most favorable recovery after exposure to 1200 °C, retaining 79.3% of its initial compressive strength. After heating, moderate GP incorporation induced viscous flow assisted sintering, pore and crack closure, and ceramic-like microstructural reconstruction. In contrast, excessive GP incorporation generated an overabundant low-viscosity liquid phase, causing over-melting-related dimensional instability. Quantitatively, the residual compressive strength showed strong correlations with the content of thermally stabilized silicate phases and the liquid fraction, with R2 values of 0.939 and 0.907, respectively. These findings demonstrate that the high-temperature performance of GP-blended cement paste is governed by a dosage-dependent liquid-phase sintering, pore-network closure and phase reconstruction mechanism, providing a predictive basis for designing thermally responsive glass-cement hybrid systems.

Förderung

  • Research Grants Council, University Grants Committee
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Construction Industry Council
  • National Natural Science Foundation of China
  • Hong Kong Green Technology Fund

Zitieren

APA

Zhao, X., Huang, Y., Lu, J., Zhou, A., Cyr, M., Yoo, D., & Poon, C. S. (2026). High-Temperature Damage Recovery of Waste Glass Cementitious Materials: Thermodynamic Prediction and Experimental Validation. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6c06976

Vancouver

Zhao X, Huang Y, Lu J, Zhou A, Cyr M, Yoo D, et al. High-Temperature Damage Recovery of Waste Glass Cementitious Materials: Thermodynamic Prediction and Experimental Validation. ACS Sustainable Chemistry & Engineering. 2026. doi:10.1021/acssuschemeng.6c06976

BibTeX
@article{Zhao2026,
  author = {Zhao, Xudong and Huang, Yujie and Lu, Jian-Xin and Zhou, Ao and Cyr, Martin and Yoo, Doo-Yeol and Poon, Chi Sun},
  title = {High-Temperature Damage Recovery of Waste Glass Cementitious Materials: Thermodynamic Prediction and Experimental Validation},
  journal = {ACS Sustainable Chemistry & Engineering},
  year = {2026},
  doi = {10.1021/acssuschemeng.6c06976}
}
Kostenlos starten →