EUVIMEDEUVIMED entdecken
Crossref

Direct-Ink-Writing Printed Aerogels with Infiltrated Field’s Metal for High Thermal Conductivity and Shape Stability

Mengxi Zhang, Dan Li, Cheng Zhen, Tengfei Yan, Yunxia Yang, Fu Guo

ACS Sustainable Chemistry & Engineering · 06.11.2026

DOI: 10.1021/acssuschemeng.6c06313 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 06.11.2026. Verfasst von Mengxi Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing power density of electronic devices demands thermal interface materials with efficient heat dissipation and structural stability. Phase-change thermal interface materials (PCTIMs) provide thermal buffering but are limited by low thermal conductivity and leakage during phase transitions. Here, a direct-ink-writing (DIW) strategy using a biobased multilayer graphene (MLG)/chitosan quaternary ammonium salt (CQAS)/cationic cellulose nanofiber (CCNF) composite ink (GQC) constructs vertically aligned porous aerogels. The GQC aerogels feature controllable 200–400 μm macroscopic channels, a vertically aligned internal porous architecture, and good mechanical compliance with a Young’s modulus of 0.322 ± 0.008 MPa. Pressure-assisted infiltration of Field’s metal (FM, 62.3 °C) forms a bicontinuous GQC/FM thermal network, in which continuous FM provides efficient heat-transfer pathways while the porous GQC framework confines molten metal. At 29 vol % FM, the composite achieves a through-plane thermal conductivity of 8.57 W m–1 K–1 and retains 95.0% of its initial value after 200 thermal cycles. Moreover, a simple alkali-assisted process recovers 92% of FM for reuse, yielding a regenerated composite with a thermal conductivity of 7.81 W m–1 K–1 (91.1% of the original value). This work presents a metallic PCTIM design integrating efficient heat transport, shape stability, and recyclability for sustainable thermal management.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Zhang, M., Li, D., Zhen, C., Yan, T., Yang, Y., & Guo, F. (2026). Direct-Ink-Writing Printed Aerogels with Infiltrated Field’s Metal for High Thermal Conductivity and Shape Stability. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6c06313

Vancouver

Zhang M, Li D, Zhen C, Yan T, Yang Y, Guo F. Direct-Ink-Writing Printed Aerogels with Infiltrated Field’s Metal for High Thermal Conductivity and Shape Stability. ACS Sustainable Chemistry & Engineering. 2026. doi:10.1021/acssuschemeng.6c06313

BibTeX
@article{Zhang2026,
  author = {Zhang, Mengxi and Li, Dan and Zhen, Cheng and Yan, Tengfei and Yang, Yunxia and Guo, Fu},
  title = {Direct-Ink-Writing Printed Aerogels with Infiltrated Field’s Metal for High Thermal Conductivity and Shape Stability},
  journal = {ACS Sustainable Chemistry & Engineering},
  year = {2026},
  doi = {10.1021/acssuschemeng.6c06313}
}
Kostenlos starten →