Copper–Cobalt Atomically Dispersed Catalysts for Selective Ammonia Electrosynthesis from Dilute Nitrate in Low-Concentration Electrolyte
ACS Sustainable Chemistry & Engineering · 09.11.2026 · 14 (44) · 20185-20196
DOI: 10.1021/acssuschemeng.6c06287 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 28.10.2026. Verfasst von Ke Lin und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Inner Mongolia University of Technology, Science and Technology Major Project of Inner Mongolia Autonomous Region of China, Natural Science Foundation of Inner Mongolia.
Abstract (Originalsprache)
Developing effective electrocatalysts that can convert low-concentration nitrate (NO3–) into ammonia (NH3) in dilute electrolytes remains a major challenge. In this work, high-performance atomically dispersed CuCo catalysts (CuCo-ADCs) were prepared using a hydrothermal route. When tested in electrolyte containing 50 ppm NO3–-N and 5 mM K2SO4 (supporting electrolyte), the catalyst delivered a high NH3 Faradaic efficiency (FE) of 92.15%, ammonia selectivity of 96.33%, and NH3 production rate of 281.28 μg h–1 cm–2 at –0.6 V vs reversible hydrogen electrode (RHE). Electrochemical measurements indicated reduced solution diffusion resistance for this catalyst. After 10 h of continuous operation, more than 85% of the initial catalytic activity could be retained. Mechanistic characterizations suggested that the atomic-level dispersion accelerated reaction kinetics and suppressed the competing hydrogen evolution reaction. Such improvement originated from the optimized *NO3 adsorption and decreased N═O bond dissociation energy through bimetallic synergy. Within this catalytic system, Cu drove the nitrate reduction reaction, Co was responsible for key bond cleavage, and Ni promoted hydrogenation steps as well as product desorption. This study offers alternative design ideas for atomically dispersed catalysts intended for resource recovery from low-concentration nitrate-rich wastewater. The present catalytic system may be applied for simultaneous nitrogen removal and ammonia generation in practical wastewater treatment.
Förderung
- Inner Mongolia University of Technology
- Science and Technology Major Project of Inner Mongolia Autonomous Region of China
- Natural Science Foundation of Inner Mongolia
- Scientific Research Startup Foundation Project
Zitieren
APA
Lin, K., Xing, L., Gao, Y., Song, L., Liu, W., & Cao, R. (2026). Copper–Cobalt Atomically Dispersed Catalysts for Selective Ammonia Electrosynthesis from Dilute Nitrate in Low-Concentration Electrolyte. ACS Sustainable Chemistry & Engineering, 14(44), 20185-20196. https://doi.org/10.1021/acssuschemeng.6c06287
Vancouver
Lin K, Xing L, Gao Y, Song L, Liu W, Cao R. Copper–Cobalt Atomically Dispersed Catalysts for Selective Ammonia Electrosynthesis from Dilute Nitrate in Low-Concentration Electrolyte. ACS Sustainable Chemistry & Engineering. 2026;14(44):20185-20196. doi:10.1021/acssuschemeng.6c06287
BibTeX
@article{Lin2026,
author = {Lin, Ke and Xing, Li and Gao, Yanfang and Song, Lei and Liu, Wei and Cao, Rui},
title = {Copper–Cobalt Atomically Dispersed Catalysts for Selective Ammonia Electrosynthesis from Dilute Nitrate in Low-Concentration Electrolyte},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
volume = {14},
number = {44},
pages = {20185--20196},
doi = {10.1021/acssuschemeng.6c06287}
}
EUVIMED