Toward Low-Carbon Metallurgy: Sustainable Iron Recovery from Copper Slag Using Hydrogen Reduction
ACS Sustainable Chemistry & Engineering · 27.07.2026 · 14 (29) · 13339-13354
DOI: 10.1021/acssuschemeng.6c05516 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 15.07.2026. Verfasst von Can Li und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Ministry of Science and Technology of the People's Republic of China, Analysis and Testing Foundation of Kunming University of Science and Technology.
Abstract (Originalsprache)
Copper slag contains abundant iron resources but has long been difficult to utilize efficiently due to its complex mineralogical composition and fine particle size. In this study, a process of hydrogen-based non-melting reduction followed by melting separation was proposed for the green and efficient recovery of iron from copper slag. Through thermodynamic analysis and systematic experimental investigations, the hydrogen reduction behavior of iron-bearing phases and the effects of key operational parameters, including temperature, reduction time, hydrogen partial pressure, and gas-to-material ratio, were clarified. The results indicate that the reduction of fayalite (Fe2SiO4) requires elevated temperature and high hydrogen partial pressure. Under optimized conditions (950 °C, 6 h, H2 > 80%, gas-to-material ratio ≥ 10.8 L·g−1), iron-bearing phases in copper slag can be efficiently transformed into metallic iron, achieving an iron recovery exceeding 99%. Subsequent melting separation enabled significant enrichment of iron, increasing the iron content in the resulting ferroalloy to approximately 96.6 wt %. Energy consumption and carbon emission calculations demonstrate that, compared with conventional carbothermic reduction, the hydrogen-based process reduced cumulative energy consumption and greenhouse gas emissions by 91.5 and 94.9%, respectively. This study provides a novel low-carbon, high-efficiency, and high-value utilization route for iron resources in copper slag.
Förderung
- Ministry of Science and Technology of the People's Republic of China
- Analysis and Testing Foundation of Kunming University of Science and Technology
Zitieren
APA
Li, C., Zhou, S., Wei, Y., Li, B., & Wang, H. (2026). Toward Low-Carbon Metallurgy: Sustainable Iron Recovery from Copper Slag Using Hydrogen Reduction. ACS Sustainable Chemistry & Engineering, 14(29), 13339-13354. https://doi.org/10.1021/acssuschemeng.6c05516
Vancouver
Li C, Zhou S, Wei Y, Li B, Wang H. Toward Low-Carbon Metallurgy: Sustainable Iron Recovery from Copper Slag Using Hydrogen Reduction. ACS Sustainable Chemistry & Engineering. 2026;14(29):13339-13354. doi:10.1021/acssuschemeng.6c05516
BibTeX
@article{Li2026,
author = {Li, Can and Zhou, Shiwei and Wei, Yonggang and Li, Bo and Wang, Hua},
title = {Toward Low-Carbon Metallurgy: Sustainable Iron Recovery from Copper Slag Using Hydrogen Reduction},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
volume = {14},
number = {29},
pages = {13339--13354},
doi = {10.1021/acssuschemeng.6c05516}
}
EUVIMED