Upcycling Cotton Textile Waste into 4D Printed Humidity-Responsive Smart Structures
ACS Sustainable Chemistry & Engineering · 15.06.2026 · 14 (23) · 10621-10634
DOI: 10.1021/acssuschemeng.6c02155 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 01.06.2026. Verfasst von Lu Yang und 7 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shaanxi Province Science and Technology Innovation Leading Talents Scientific Research Project, Innovation Capability Support Program of Shaanxi.
Abstract (Originalsprache)
Textile waste has emerged as a significant global challenge. In response, increasing attention is being directed toward the recycling of textile waste, especially cellulose, as a sustainable strategy to mitigate the environmental impact of industrial waste. However, current recycling methods offer limited application scenarios and often suffer from low efficiency. Herein, we developed a humidity-responsive actuator entirely derived from waste cotton fabrics. A composite ink was formulated by decolorizing, dissolving, nanofabricating, and mixing the waste cotton fabrics, and a humidity-responsive actuator was fabricated using direct ink writing technology. The actuator exhibits reversible and significant bending behavior under humidity stimulation, achieving a bending curvature of approximately 1.4 cm–1 with a rapid response. We demonstrated that the humidity-responsive actuator can mimic natural motions such as butterfly wing spreading, flower blooming, gripping device, and crawling robot. More importantly, based on this actuator, we simulated intelligent, sweat-responsive wearable devices that autonomously deform during physical activity to enhance sweat evaporation and air convection, thereby supporting personalized heat and moisture regulation. This work highlights the potential of waste cotton fabrics for efficient recycling and intelligent applications. It offers a scalable, and cost-effective strategy for 4D printing of humidity-responsive actuators, paving the way for developing environmentally friendly smart devices.
Förderung
- National Natural Science Foundation of China
- Shaanxi Province Science and Technology Innovation Leading Talents Scientific Research Project
- Innovation Capability Support Program of Shaanxi
- Shaanxi Provincial Science and Technology Department Scientific Research Project
- Young Talent Fund of Association for Science and Technology in Shaanxi, China
- Key Research and Development Program of Shaanxi
- Scientific Research Program Funded by Shaanxi Provincial Education Department
- Young Talent Fund of Xi'an Association for Science and Technology
Zitieren
APA
Yang, L., Meng, J., Sun, Z., Zhao, Y., Yue, H., Fu, R., Tian, R., & Zhi, C. (2026). Upcycling Cotton Textile Waste into 4D Printed Humidity-Responsive Smart Structures. ACS Sustainable Chemistry & Engineering, 14(23), 10621-10634. https://doi.org/10.1021/acssuschemeng.6c02155
Vancouver
Yang L, Meng J, Sun Z, Zhao Y, Yue H, Fu R, et al. Upcycling Cotton Textile Waste into 4D Printed Humidity-Responsive Smart Structures. ACS Sustainable Chemistry & Engineering. 2026;14(23):10621-10634. doi:10.1021/acssuschemeng.6c02155
BibTeX
@article{Yang2026,
author = {Yang, Lu and Meng, Jiaguang and Sun, Zhaoling and Zhao, Yanmin and Yue, Hong and Fu, Ranqian and Tian, Rui and Zhi, Chao},
title = {Upcycling Cotton Textile Waste into 4D Printed Humidity-Responsive Smart Structures},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
volume = {14},
number = {23},
pages = {10621--10634},
doi = {10.1021/acssuschemeng.6c02155}
}
EUVIMED