Low-Cost Biomass-Derived Lignosulfonate with Tin Plating/Stripping for Acidic Aqueous Redox Flow Storage
ACS Sustainable Chemistry & Engineering · 15.06.2026 · 14 (23) · 10610-10620
DOI: 10.1021/acssuschemeng.6c02080 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 04.06.2026. Verfasst von Athul Seshadri Ramanujam und 2 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Gefördert von: Horizon 2020, Agencia Estatal de Investigación.
Abstract (Originalsprache)
Biomass-derived redox couples that sustain fast, reversible electrochemistry at practical current densities are of growing interest for low-cost (bio)polymer redox flow batteries. Sodium lignosulfonate (NaLS), a lignin-derived biopolymer, exhibits markedly enhanced proton-coupled redox kinetics and reversibility in strongly acidic chloride media, with 2 M HCl outperforming H2SO4, neutral NaCl, and alkaline KOH electrolytes. Leveraging this acid compatibility, we develop an acidic Sn||NaLS hybrid aqueous redox flow battery that couples NaLS redox on porous carbon felt with Sn2+/Sn0 plating–stripping from SnCl2 in 2 M HCl. Negative-substrate screening identifies Cu as the most reversible Sn plating surface, enabling stable cycling at 10 mA cm–2. At 10 mM NaLS (250 g L–1), the optimized cell delivers 3.69 Ah L–1 (14.55 mAh gNaLS–1) with an average discharge voltage of ∼0.73 V and ∼47% average energy efficiency over 80 cycles. Benchmarking against state-of-the-art aqueous lignin-based RFBs, this work achieves one of the highest volumetric capacities and energy densities (2.69 Wh L–1) among lignin-based systems. Post-cycling electrochemical and spectroscopic characterization reveals that capacity fading is primarily governed by the chemical degradation of NaLS. These findings identify critical optimization targets such as understanding electrolyte-lignin compatibility and enhancing Sn plating/stripping reversibility, to increase Coulombic efficiency and ensure long-term cycling stability.
Förderung
- Horizon 2020
- Agencia Estatal de Investigación
Zitieren
APA
Ramanujam, A. S., Patil, N., & Marcilla, R. (2026). Low-Cost Biomass-Derived Lignosulfonate with Tin Plating/Stripping for Acidic Aqueous Redox Flow Storage. ACS Sustainable Chemistry & Engineering, 14(23), 10610-10620. https://doi.org/10.1021/acssuschemeng.6c02080
Vancouver
Ramanujam AS, Patil N, Marcilla R. Low-Cost Biomass-Derived Lignosulfonate with Tin Plating/Stripping for Acidic Aqueous Redox Flow Storage. ACS Sustainable Chemistry & Engineering. 2026;14(23):10610-10620. doi:10.1021/acssuschemeng.6c02080
BibTeX
@article{Ramanujam2026,
author = {Ramanujam, Athul Seshadri and Patil, Nagaraj and Marcilla, Rebeca},
title = {Low-Cost Biomass-Derived Lignosulfonate with Tin Plating/Stripping for Acidic Aqueous Redox Flow Storage},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
volume = {14},
number = {23},
pages = {10610--10620},
doi = {10.1021/acssuschemeng.6c02080}
}
EUVIMED