EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations

Elisavet Anglou iD, Yuchen Chang iD, William Bradley iD, Carsten Sievers, Fani Boukouvala iD

ACS Sustainable Chemistry & Engineering · 17.06.2024 · 12 (24) · 9003-9017

DOI: 10.1021/acssuschemeng.3c06081 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 04.06.2024. Verfasst von Elisavet Anglou und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta , Georgia 30332, United States. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Emerging Frontiers, Kolon Center for Lifestyle Innovation, Georgia Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing efficient and sustainable chemical recycling pathways for consumer plastics is critical for mitigating the negative environmental implications associated with their end-of-life management. Mechanochemical depolymerization reactions have recently garnered great attention, as they are recognized as a promising solution for solvent-free transformation of polymers to monomers in the solid state. To this end, physics-based models that accurately describe the phenomena within ball mills are necessary to facilitate the exploration of operating conditions that would lead to optimal performance. Motivated by this, in this paper we develop a mathematical model that couples results from discrete element method (DEM) simulations and experiments to study mechanically-induced depolymerization. The DEM model was calibrated and validated via video experimental data and computer vision algorithms. A systematic study on the influence of the ball-mill operating parameters revealed a direct relationship between the operating conditions of the vibrating milling vessel and the total energy supplied to the system. Moreover, we propose a linear correlation between the high-fidelity DEM simulation results and experimental monomer yield data for poly(ethylene terephthalate) depolymerization, linking mechanical and energetic variables. Finally, we train a reduced-order model to address the high computational cost associated with DEM simulations. The predicted working variables are used as inputs to the proposed mathematical expression which allows for the fast estimation of monomer yields.

Autor:innen und Institutionen

  • School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta , Georgia 30332, United States.
  • Renewable Bioproducts Institute, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.

ORCID-Profile: Elisavet Anglou, Yuchen Chang, William Bradley, Fani Boukouvala

Förderung

  • Division of Emerging Frontiers
  • Kolon Center for Lifestyle Innovation, Georgia Institute of Technology

Zitieren

APA

Anglou, E., Chang, Y., Bradley, W., Sievers, C., & Boukouvala, F. (2024). Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations. ACS Sustainable Chemistry & Engineering, 12(24), 9003-9017. https://doi.org/10.1021/acssuschemeng.3c06081

Vancouver

Anglou E, Chang Y, Bradley W, Sievers C, Boukouvala F. Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations. ACS Sustainable Chemistry & Engineering. 2024;12(24):9003-9017. doi:10.1021/acssuschemeng.3c06081

BibTeX
@article{Anglou2024,
  author = {Anglou, Elisavet and Chang, Yuchen and Bradley, William and Sievers, Carsten and Boukouvala, Fani},
  title = {Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations},
  journal = {ACS Sustainable Chemistry & Engineering},
  year = {2024},
  volume = {12},
  number = {24},
  pages = {9003--9017},
  doi = {10.1021/acssuschemeng.3c06081}
}
Kostenlos starten →