From Benchtop to Body: Solution Resistance-Induced Distortion in Electrochemical, Aptamer-Based Sensors
ACS Sensors · 11.11.2026
DOI: 10.1021/acssensors.6c03721 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 11.11.2026. Verfasst von Jennifer M Gibson und 6 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Program in Quantitative Biosciences, University of California, Santa Barbara, Santa Barbara, California93106, United States. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIBIB NIH HHS, National Institute of Biomedical Imaging and Bioengineering.
Abstract (Originalsprache)
By providing continuous, in vivo molecular measurements, electrochemical aptamer-based (EAB) sensors have the potential to improve the fidelity with which pharmaceutical drugs are administered and physiological processes are monitored. The impact of solution resistance on EAB sensor response, however, has not been systematically investigated, despite its potential to introduce systematic errors in concentration measurements. Here, we show that uncompensated solution resistance of wire-based EAB sensors can increase from a few hundred ohms in vitro up to ∼1–2 kΩ in vivo. This elevated resistance increases the RC charging time constant of the electrode interface, allowing non-faradaic charging currents to persist into the sampling window used during square wave voltammetry. As a result, capacitive currents contribute to the measured signal, distorting sensor responses whenever the interrogation frequency falls within this RC-limited charging regime. Using three representative EAB sensors, we show that changes in uncompensated solution resistance between calibration and measurement conditions can, for some sensors, cause target concentrations to be systematically underestimated, with the magnitude of this error strongly dependent on interrogation frequency. We also introduce a simple strategy by which the calibration of in vivo EAB sensors can be improved by introducing a resistor in series with the working electrode during in vitro testing. Finally, we provide further strategies by which the errors introduced by uncompensated solution resistance can be reduced to negligible levels.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Interdisciplinary Program in Quantitative Biosciences, University of California, Santa Barbara, Santa Barbara, California93106, United States.
- Nutromics Pty Ltd. , Brunswick, VIC3056, Australia.
- Institute for Collaborative Biotechnologies, University of California, Santa Barbara, Santa Barbara, California93106, United States.
- Department of Psychological and Brain Sciences, University of California, Santa Barbara, Santa Barbara, California93106, United States.
- Neuroscience Research Institute, University of California, Santa Barbara, Santa Barbara, California93106, United States.
- Department of Molecular, Cellular, and Developmental Biology, University of California, Santa Barbara, Santa Barbara, California93106, United States.
ORCID-Profile: Jennifer M Gibson, Kon Son, Kevin W Plaxco, Lior Sepunaru, Bob M Lansdorp
Förderung
- NIBIB NIH HHS
- National Institute of Biomedical Imaging and Bioengineering
Zitieren
APA
Gibson, J. M., Gerson, J., Son, K., Kippin, T. E., Plaxco, K. W., Sepunaru, L., & Lansdorp, B. M. (2026). From Benchtop to Body: Solution Resistance-Induced Distortion in Electrochemical, Aptamer-Based Sensors. ACS Sensors. https://doi.org/10.1021/acssensors.6c03721
Vancouver
Gibson JM, Gerson J, Son K, Kippin TE, Plaxco KW, Sepunaru L, et al. From Benchtop to Body: Solution Resistance-Induced Distortion in Electrochemical, Aptamer-Based Sensors. ACS Sensors. 2026. doi:10.1021/acssensors.6c03721
BibTeX
@article{Gibson2026,
author = {Gibson, Jennifer M and Gerson, Julian and Son, Kon and Kippin, Tod E and Plaxco, Kevin W and Sepunaru, Lior and Lansdorp, Bob M},
title = {From Benchtop to Body: Solution Resistance-Induced Distortion in Electrochemical, Aptamer-Based Sensors},
journal = {ACS Sensors},
year = {2026},
doi = {10.1021/acssensors.6c03721}
}
EUVIMED