Flexible Sensor Array Based on Polythiophene/Cu-MOF-Derived CuO and Polyaniline/MXene Composites for Room-Temperature Detection of Hydrogen Sulfide and Ammonia
ACS Sensors · 2026
DOI: 10.1021/acssensors.6c01015 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, 2026. Verfasst von Kuo Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Measurement and Control Technology and Communication Engineering, Harbin University of Science and Technology, Harbin150080, China. Hauptthemen laut MEDLINE: Ammonia, Copper, Hydrogen Sulfide, Polymers. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, China National Basic Enhancement Program.
Abstract (Originalsprache)
Real-time detection of hydrogen sulfide (H2S) and ammonia (NH3) is important for occupational safety in humid, mixed-gas environments, yet conventional chemiresistive sensors remain limited by cross-sensitivity, humidity dependence, and poor portability at room temperature. Here, we report a flexible dual-channel sensor array coupled with a gated recurrent unit-convolutional neural network (GRU-CNN). A polythiophene/Cu-MOF-derived CuO composite (PTh/CuO) targets H2S through sulfur-affinitive CuO surface sites, whereas a polyaniline/Ti3C2Tx MXene composite (PANI/MXene) targets NH3 through PANI deprotonation and interfacial charge modulation. At 25 ± 1 °C, the optimized PTh/CuO and PANI/MXene channels exhibited responses of 87.5% to 100 ppm H2S and 189% to 100 ppm NH3, respectively, together with linear responses over 1−10 ppm (R2 = 0.997 and 0.998) and theoretical limits of detection of 73.3 and 40.4 ppb. Distinct responses were retained at 300 ppb H2S and 200 ppb NH3, with response/recovery times of 15/22 and 25/43 s, respectively. A GRU-CNN model trained using dynamic four-channel signals supported gas classification and concentration estimation across 0−10 ppm and 30%−80% relative humidity within the tested dataset; the maximum concentration-prediction mean squared errors were 0.020 for H2S and 0.015 for NH3. The channels retained 98.4% and 98.1% of their initial responses under 30° bending. Integration with a wireless wristband enabled remote signal acquisition and a wearable monitoring demonstration. This work combines chemically differentiated sensing channels, humidity-inclusive data analysis, and flexible wireless readout within a single room-temperature platform.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Measurement and Control Technology and Communication Engineering, Harbin University of Science and Technology, Harbin150080, China.
ORCID-Profile: Yunbo Shi
Förderung
- National Natural Science Foundation of China
- China National Basic Enhancement Program
Zitieren
APA
Zhao, K., Shi, Y., Niu, H., Liu, J., Yang, X., & Tang, B. (2026). Flexible Sensor Array Based on Polythiophene/Cu-MOF-Derived CuO and Polyaniline/MXene Composites for Room-Temperature Detection of Hydrogen Sulfide and Ammonia. ACS Sensors. https://doi.org/10.1021/acssensors.6c01015
Vancouver
Zhao K, Shi Y, Niu H, Liu J, Yang X, Tang B. Flexible Sensor Array Based on Polythiophene/Cu-MOF-Derived CuO and Polyaniline/MXene Composites for Room-Temperature Detection of Hydrogen Sulfide and Ammonia. ACS Sensors. 2026. doi:10.1021/acssensors.6c01015
BibTeX
@article{Zhao2026,
author = {Zhao, Kuo and Shi, Yunbo and Niu, Haodong and Liu, Jinzhou and Yang, Xiaohui and Tang, Bolun},
title = {Flexible Sensor Array Based on Polythiophene/Cu-MOF-Derived CuO and Polyaniline/MXene Composites for Room-Temperature Detection of Hydrogen Sulfide and Ammonia},
journal = {ACS Sensors},
year = {2026},
doi = {10.1021/acssensors.6c01015}
}
EUVIMED