Spray-Printed UiO-66/Polyaniline Composite Films: Tuning MOF Content and Conductivity for Enhanced Ammonia Detection
ACS Sensors · 11.08.2026
DOI: 10.1021/acssensors.6c00717 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 11.08.2026. Verfasst von Tzer-Rurng Su und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical, Biological, and Environmental Engineering, Oregon State University, 105 SW 26th St, Corvallis, Oregon97331, United States. Die Arbeit nennt 57 Literaturangaben. Gefördert von: U.S. Department of Homeland Security.
Abstract (Originalsprache)
Low-concentration ammonia detection is critical for applications in environmental monitoring, agricultural production, and occupational health protection. To enhance the material's gas-detection capability, a nanocomposite of a MOF and a conducting polymer was synthesized via in situ polymerization and systematically optimized for chemiresistive ammonia sensing. By varying the UiO-66 loading, the trade-off between gas-accessible surface area and electrical conductivity was established. A contactless spray-deposition technique was developed to fabricate composite films on compact interdigitated electrode platforms, overcoming the limitations of conventional drop-casting methods in film uniformity and device reproducibility. The optimized 5 wt % UiO-66/PANI sensor demonstrated exceptional performance, with 138% sensitivity at 100 ppb ammonia, representing nearly a three-fold improvement over pristine PANI (48% at 100 ppb). The sensor exhibited excellent selectivity toward ammonia over common interfering gases, robust stability across varying humidity conditions, and consistent performance over long-term cyclic testing. An open-space demonstration in a laboratory environment validated the sensor's real-time ammonia-monitoring capability, with performance comparable to that of a commercial ammonia sensor. This work provides a systematic approach to optimizing MOF/conducting polymer composites for gas-sensing applications via a reliable selected-area deposition method. The results demonstrate the potential of UiO-66/PANI nanocomposites as a practical platform for ammonia detection in environmental and industrial settings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical, Biological, and Environmental Engineering, Oregon State University, 105 SW 26th St, Corvallis, Oregon97331, United States.
- Crescent Valley High School , 4444 NW Highland Dr, Corvallis, Oregon97330, United States.
- Department of Chemistry, Oregon State University, 153 Gilbert Hall, Corvallis, Oregon97331, United States.
- SGX Sensortech, 2605 Trade Centre Ave., Longmont, Colorado80503, United States.
- School of Nuclear Science and Engineering, Oregon State University, 1791 SW Campus Way, Corvallis, Oregon97331, United States.
ORCID-Profile: Changqing Pan, Ankit K Yadav, Kyriakos Stylianou, Chih-Hung Chang
Förderung
- U.S. Department of Homeland Security
Zitieren
APA
Su, T. R., Vong, D., Weiss, L., Pan, C., Yadav, A. K., Kostelecky, C., Stylianou, K., Yang, H., & Chang, C. H. (2026). Spray-Printed UiO-66/Polyaniline Composite Films: Tuning MOF Content and Conductivity for Enhanced Ammonia Detection. ACS Sensors. https://doi.org/10.1021/acssensors.6c00717
Vancouver
Su TR, Vong D, Weiss L, Pan C, Yadav AK, Kostelecky C, et al. Spray-Printed UiO-66/Polyaniline Composite Films: Tuning MOF Content and Conductivity for Enhanced Ammonia Detection. ACS Sensors. 2026. doi:10.1021/acssensors.6c00717
BibTeX
@article{Su2026,
author = {Su, Tzer-Rurng and Vong, Derrick and Weiss, Lillian and Pan, Changqing and Yadav, Ankit K and Kostelecky, Clayton and Stylianou, Kyriakos and Yang, Haroi and Chang, Chih-Hung},
title = {Spray-Printed UiO-66/Polyaniline Composite Films: Tuning MOF Content and Conductivity for Enhanced Ammonia Detection},
journal = {ACS Sensors},
year = {2026},
doi = {10.1021/acssensors.6c00717}
}
EUVIMED