Cultivating Fully Biomass Pressure Sensors for Gait Analysis
ACS Sensors · 22.08.2025 · 10 (8) · 6154-6166
DOI: 10.1021/acssensors.5c01823 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, online erschienen am 30.07.2025. Verfasst von Zongxue Gu und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China. Hauptthemen laut MEDLINE: Biomass, Gait Analysis, Biosensing Techniques. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Department of Science and Technology of Hubei Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Incorporating biomass (e.g., bacterial cellulose, BC) pressure-sensing structures into plantar monitoring technologies could effectively defend users against insecure wear and inaccurate detection, while their capability in sensing pressure continuously when subjected to large pressure is hindered by their natural two-dimensional structure. Here, we present a microbial engineering strategy for fabricating hierarchical fully biomass pressure sensors (HFBPSs) with sufficient sensing capabilities and good structural stability for plantar pressure detection. Particularly, the incorporation of the biobased material loofah enables HFBPS to adopt a hierarchical structure from micro- and nanostructured sensing networks, allowing for dynamic changes in the series-parallel configuration of the circuit under large pressure. This innovative structure design breaks the bottleneck of low operating range encountered by traditional rigid two-dimensional BC pressure sensors, ensuring the HFBPS with ultrahigh sensitivity (2.82 kPa-1) and wide detection range (0-600 kPa). In addition to stably monitoring gait motions, the HFBPS integrated into smart insoles can recognize nonstandard Tai Chi movements. Our HFBPS with exceptional pressure-sensing performance provides significant impact on the future development of smart insoles for plantar monitoring.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China.
- College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China.
- College of Textile Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
ORCID-Profile: Keshuai Liu, Can Ge, Hui Sun, Duo Xu
Förderung
- National Key Research and Development Program of China
- Department of Science and Technology of Hubei Province
- National Natural Science Foundation of China
- Key Research and Development Program of Hubei Province
Zitieren
APA
Gu, Z., Liu, Y., Liu, K., Yang, S., Ye, S., Sun, P., Ge, C., Yu, B., Sun, H., Gao, C., & Xu, D. (2025). Cultivating Fully Biomass Pressure Sensors for Gait Analysis. ACS Sensors, 10(8), 6154-6166. https://doi.org/10.1021/acssensors.5c01823
Vancouver
Gu Z, Liu Y, Liu K, Yang S, Ye S, Sun P, et al. Cultivating Fully Biomass Pressure Sensors for Gait Analysis. ACS Sensors. 2025;10(8):6154-6166. doi:10.1021/acssensors.5c01823
BibTeX
@article{Gu2025,
author = {Gu, Zongxue and Liu, Yingcun and Liu, Keshuai and Yang, Shichang and Ye, Senyuan and Sun, Ping and Ge, Can and Yu, Bin and Sun, Hui and Gao, Chong and Xu, Duo},
title = {Cultivating Fully Biomass Pressure Sensors for Gait Analysis},
journal = {ACS Sensors},
year = {2025},
volume = {10},
number = {8},
pages = {6154--6166},
doi = {10.1021/acssensors.5c01823}
}
EUVIMED