Solid-State Nanopore Sizing for cfDNA Sample Quality Control in Point-of-Need Sequencing
ACS Sensors · 2025
DOI: 10.1021/acssensors.5c00803 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, 2025. Verfasst von Muhammad Asad Ullah Khalid und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Intelligent Systems Engineering, Indiana University, Bloomington, Indiana 47408, United States. Hauptthemen laut MEDLINE: Nanopores, Cell-Free Nucleic Acids, Sequence Analysis, DNA, Point-of-Care Systems. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Institute of Food and Agriculture, National Institute of Allergy and Infectious Diseases, Division of Electrical, Communications and Cyber Systems.
Abstract (Originalsprache)
DNA sequencing is a powerful tool for diagnosing conditions such as infectious diseases and cancers. Even though current workflows demand rigorous quality control (QC) of DNA samples, this QC is typically limited to lab settings despite recent advances in portable nanopore sequencers. For personalized health care to truly benefit from the portable sequencer, QC must be performed right where the samples are processed. Here, we present a solid-state nanopore device that provides label-free, controlled quantification and qualification of cell-free DNA (cfDNA). We demonstrated the use of a 1 kbp double-stranded DNA internal marker at a known concentration to measure the concentration of a representative cfDNA target in the presence of genomic DNA. We also found that nanopores with diameters ranging from 6 to 19 nm yield consistent measurements with a maximum coefficient of variation (CV) of less than 15%. Moreover, analyzing data from multiple nanopores over longer acquisition times can reduce the uncertainty to below 10% CV. Finally, we applied our nanopore QC assay to a plasma cfDNA sample and compared the results to those from a capillary electrophoresis (CE) assay. Both methods produced highly correlated measurements, demonstrating the potential of our nanopore QC assay for effective cfDNA assessment at the point of need.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Intelligent Systems Engineering, Indiana University, Bloomington, Indiana 47408, United States.
- Department of Electrical Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, United States.
- Department of Biomedical Engineering, Pennsylvania State University, University Park, Pennsylvania 16802, United States.
ORCID-Profile: Muhammad Asad Ullah Khalid, Md Ahasan Ahamed, Anthony J Politza, Weihua Guan
Förderung
- National Institute of Food and Agriculture
- National Institute of Allergy and Infectious Diseases
- Division of Electrical, Communications and Cyber Systems
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
Zitieren
APA
Khalid, M. A. U., Ahamed, M. A., Politza, A. J., & Guan, W. (2025). Solid-State Nanopore Sizing for cfDNA Sample Quality Control in Point-of-Need Sequencing. ACS Sensors. https://doi.org/10.1021/acssensors.5c00803
Vancouver
Khalid MAU, Ahamed MA, Politza AJ, Guan W. Solid-State Nanopore Sizing for cfDNA Sample Quality Control in Point-of-Need Sequencing. ACS Sensors. 2025. doi:10.1021/acssensors.5c00803
BibTeX
@article{Khalid2025,
author = {Khalid, Muhammad Asad Ullah and Ahamed, Md Ahasan and Politza, Anthony J and Guan, Weihua},
title = {Solid-State Nanopore Sizing for cfDNA Sample Quality Control in Point-of-Need Sequencing},
journal = {ACS Sensors},
year = {2025},
doi = {10.1021/acssensors.5c00803}
}
EUVIMED