Tailorable Ultrathin Copper Oxysulfide for Room-Temperature, Reversible, and Selective Hydrogen Sulfide Sensing
ACS Sensors · 2025
DOI: 10.1021/acssensors.4c03349 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sensors, 2025. Verfasst von Li Zhou und 14 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu, Sichuan 610213, China. Hauptthemen laut MEDLINE: Hydrogen Sulfide, Copper, Sulfides. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Centre of Excellence in Future Low-Energy Electronics Technologies, Australian Research Council.
Abstract (Originalsprache)
Accurate, low-cost, and energy-efficient detection of hydrogen sulfide (H2S) is vital for industries such as petroleum, natural gas, and wastewater treatment. While chemiresistive sensors are well suited for this purpose, traditional metal oxides typically require high operating temperatures (>100 °C) or external stimuli (e.g., UV light) for activation. In this work, we introduce two-dimensional (2D) copper oxysulfide nanoflakes (∼10 nm thick) as a novel material for room-temperature, reversible, and selective H2S sensing. These 2D copper oxysulfides, synthesized via the calcination of copper sulfide under both oxygen-deficient and oxygen-rich conditions, show significant changes in crystal structure and electronic band properties compared to copper sulfide while retaining p-type semiconducting behavior. This alteration enables efficient interfacial charge transfer with adsorbed H2S molecules. The oxygen-rich copper oxysulfide exhibits a response magnitude of 143% for 2 ppm of H2S in air at room temperature, with a linear response across concentrations ranging from 0.25 to 2 ppm. Furthermore, the sensor demonstrates complete reversibility, excellent selectivity, and high stability. This work presents a promising strategy for high-performance room-temperature H2S sensing utilizing metal oxysulfides as an emerging class of materials derived from metal oxides and sulfides.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu, Sichuan 610213, China.
- Key Laboratory of Natural Gas Quality Control and Energy Measurement, China National Petroleum Corporation (CNPC), Chengdu, Sichuan 610213, China.
- Key Laboratory of Natural Gas Quality Control and Energy Measurement, State Administration for State Market Regulation, Chengdu, Sichuan 610213, China.
- School of Engineering, RMIT University, Melbourne, Victoria 3001, Australia.
- Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031, China.
ORCID-Profile: Rui Ou, Pu Zhang, Jiaru Zhang, Guanghui Ren, Zhong Li, Bao Yue Zhang, Jian Zhen Ou
Förderung
- Centre of Excellence in Future Low-Energy Electronics Technologies, Australian Research Council
Zitieren
APA
Zhou, L., Ou, R., Zhang, P., Shen, L., Xu, K., Wang, W., Afrin, S., Luan, Y., Zhang, J., Ren, G., Cheng, Y., Li, Z., Chen, G., Zhang, B. Y., & Ou, J. Z. (2025). Tailorable Ultrathin Copper Oxysulfide for Room-Temperature, Reversible, and Selective Hydrogen Sulfide Sensing. ACS Sensors. https://doi.org/10.1021/acssensors.4c03349
Vancouver
Zhou L, Ou R, Zhang P, Shen L, Xu K, Wang W, et al. Tailorable Ultrathin Copper Oxysulfide for Room-Temperature, Reversible, and Selective Hydrogen Sulfide Sensing. ACS Sensors. 2025. doi:10.1021/acssensors.4c03349
BibTeX
@article{Zhou2025,
author = {Zhou, Li and Ou, Rui and Zhang, Pu and Shen, Lin and Xu, Kai and Wang, Weijie and Afrin, Sanjida and Luan, Yange and Zhang, Jiaru and Ren, Guanghui and Cheng, Yinfen and Li, Zhong and Chen, Guanyu and Zhang, Bao Yue and Ou, Jian Zhen},
title = {Tailorable Ultrathin Copper Oxysulfide for Room-Temperature, Reversible, and Selective Hydrogen Sulfide Sensing},
journal = {ACS Sensors},
year = {2025},
doi = {10.1021/acssensors.4c03349}
}
EUVIMED