EUVIMEDEUVIMED entdecken
Open Access

Employing Triphenylene-Based, Layered, Conductive Metal–Organic Framework Materials as Electrochemical Sensors for Nitric Oxide in Aqueous Media

Emma K Ambrogi iD, Yuxin Li, Priyanshu Chandra iD, Katherine A Mirica iD

ACS Sensors · 2025

DOI: 10.1021/acssensors.4c03229 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sensors, 2025. Verfasst von Emma K Ambrogi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Burke Laboratories, Dartmouth College, 41 College St., Hanover, New Hampshire 03755, United States. Hauptthemen laut MEDLINE: Nitric Oxide, Electrochemical Techniques, Chrysenes, Metal-Organic Frameworks. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NIGMS NIH HHS, National Institute of General Medical Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes the first use of conductive metal-organic frameworks as the active material in the electrochemical detection of nitric oxide in aqueous solution. Four hexahydroxytriphenylene (HHTP)-based MOFs linked with first-row transition metal nodes (M = Co, Ni, Cu, Zn) were compared as thin-film working electrodes for promoting oxidation of NO using voltammetric and amperometric techniques. Cu- and Ni-linked MOF analogs provided signal enhancement of 5- to 7-fold over a control glassy carbon electrode (SANO = 6.7 ± 1.2 and 5.7 ± 1.1 for Ni3(HHTP)2 and Cu3(HHTP)2, respectively) for detecting micromolar concentrations of NO. Zinc-based MOF electrodes offered more limited enhancement (SANO = 3.1 ± 0.5), while the cobalt-based MOF analog had intrinsic redox activity at potentials close to NO oxidation, which interfered with sensing. Combining MOFs with a conductive polymer improved electrode stability under repeated electrochemical scanning (14 ± 3% decrease in signal over 10 scans). The stabilized Ni3(HHTP)2@polymer-coated electrodes were able to detect NO at physiologically relevant concentrations (LOD = 9.0 ± 4.8 nM) in amperometric sensing experiments, and exhibited moderate selectivity against ascorbic acid and nitrite (log kj,NO = -1.3 ± 0.3 and -0.83 ± 0.68 for ascorbic acid and nitrite, respectively). This study demonstrates that layered, conductive 2D MOFs have promising applicability for NO detection in aqueous environments.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nitric OxideElectrochemical TechniquesChrysenesMetal-Organic FrameworksWaterElectrodesElectric ConductivityOxidation-Reduction

Stichwörter der Autor:innen

electrochemical sensorsmetal−organic frameworksminiature sensorsnitric oxidetriphenylene-based MOFs

Substanzen

Nitric OxideWaterChrysenesMetal-Organic Frameworks

Autor:innen und Institutionen

  • Department of Chemistry, Burke Laboratories, Dartmouth College, 41 College St., Hanover, New Hampshire 03755, United States.

ORCID-Profile: Emma K Ambrogi, Priyanshu Chandra, Katherine A Mirica

Förderung

  • NIGMS NIH HHS
  • National Institute of General Medical Sciences

Zitieren

APA

Ambrogi, E. K., Li, Y., Chandra, P., & Mirica, K. A. (2025). Employing Triphenylene-Based, Layered, Conductive Metal–Organic Framework Materials as Electrochemical Sensors for Nitric Oxide in Aqueous Media. ACS Sensors. https://doi.org/10.1021/acssensors.4c03229

Vancouver

Ambrogi EK, Li Y, Chandra P, Mirica KA. Employing Triphenylene-Based, Layered, Conductive Metal–Organic Framework Materials as Electrochemical Sensors for Nitric Oxide in Aqueous Media. ACS Sensors. 2025. doi:10.1021/acssensors.4c03229

BibTeX
@article{Ambrogi2025,
  author = {Ambrogi, Emma K and Li, Yuxin and Chandra, Priyanshu and Mirica, Katherine A},
  title = {Employing Triphenylene-Based, Layered, Conductive Metal–Organic Framework Materials as Electrochemical Sensors for Nitric Oxide in Aqueous Media},
  journal = {ACS Sensors},
  year = {2025},
  doi = {10.1021/acssensors.4c03229}
}
Kostenlos starten →